Cleaning And Maintenance; Environmental Instructions And Disposal Information - Parkside PSH 3 A2 Montage-, Bedienungs- Und Sicherheitshinweise

... / Cleaning and ... / Environmental ... / Environmental ... / Troubleshooting
Table for setting the darkening shades
1.5 6 10 15 30 40 60 70 100 125 150 175 200 225 250 300 350 400 450 500 600
SMAW
MAG
TIG /
GTAW
MIG
(heavy)
MIG
(light)
PAC
PAW 4 5
SMAW: welding with coated electrodes
MIG (heavy): MIG welding heavy metals
MIG (light): MIG welding light metals and alloys
TIG / GTAW: welding with inert gases
MAG: welding with metal active gas
PAC: plasma cutting
PAW: plasma welding

Cleaning and Maintenance

Do not use any harsh cleaning agents to clean
the helmet casing
2
Never bring the UV filter
Clean the product with a soft, dry cloth, with a
cloth dampened with pure alcohol or with a
cloth dampened with disinfectant.
Troubleshooting
Error
The filter does not darken in a
normal way or flickers.
Arc current (ampere)
8 9
8 9
8 9 10
9
6 7 8
.
into contact with water.
8
Cause
The protector does not darken in
a normal way or flickers.
The arc sensor is not clear.
The welding current is too low.
10 11
10 11
11
10 11
10 11
9 10 11 12
9 10 11
Environmental instructions
and disposal information
Don't waste, recycle!
The device, accessories and packaging
should be recycled in an environmen-
tally friendly manner.
Do not throw the auto-darkening welding helmet
into household rubbish, fire or water. If possible,
non-operational equipment should be recycled.
Contact your local retailer for information.
12 13
12
12 13
12 13
12 13 14
13
12
Solution
Clean the protector or replace it.
Clean the arc sensor's surface.
Set the sensitivity to the maximum
degree.
14
13 14
14
GB/IE 19