Herunterladen Inhalt Inhalt Diese Seite drucken

Scope Of Delivery; Safety Instructions - Parkside PSH 3 A2 Montage-, Bedienungs- Und Sicherheitshinweise

Automatik-schweisshelm
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
Switch on / off:
Energy supply:
UV / IR protection:
Operating temperature: -5 °C to +55 °C
Storage temperature:
Welding procedures:
Maximum service life:

Scope of delivery

1 Auto-Darkening Welding Helmet
1 Set of instructions for use

Safety instructions

Please carefully read the instructions
for use and follow the specified no-
tices. Familiarise yourself with the
equipment, its proper use and the
safety notices using these instructions
for use. All technical data about this
welding helmet is on the label, please
learn about this product's technical
facts.
This device may be used by chil-
dren aged 16 years and up, as
well as by persons with reduced
physical, sensory or mental capac-
ities, or lacking experience and /
or knowledge, so long as they
are supervised or instructed in
the safe use of the device and
understand the associated risks.
Fully automatic
Solar cell
DIN 16
-20 °C to +70 °C
MMA, MIG, MAG, TIG,
plasma cutting and
plasma welding
approx. 6 years
Introduction / Safety instructions
Do not allow children to play
with the product. Cleaning and
user maintenance should not be
performed by children without
supervision.
The welding helmet with automatic
darkening is not suitable for laser
and gas welding.
Never place the welding helmet
on hot surfaces.
Never open the welding helmet.
Never carry out repairs on or
modifications to the welding hel-
met. These may only be carried
out by trained experts.
Please ensure that you have set
the automatic darkening before
each welding procedure.
The safety visor should not be
opened. It protects the filter from
dirt and damage.
If the filter does not automatically
darken, then immediately end the
welding procedure and contact
the manufacturer.
Only use the welding helmet in
temperatures between -5 °C and
+55 °C. The filter's reaction time
will slow down if this temperature
has not been reached or is ex-
ceeded.
Clean the filter, the surface of
the helmet and the solar cells
regularly.
GB/IE
17

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis