Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Product Specifications
Air Drill
Part number 0 607 160 ...
No load speed
Power output
Max. drilling diameter in steel
Items included
without drill chuck
Keyless chuck
Key-type chuck
Direction of rotation
Drill spindle thread
Wrench flats 2 on the drill
spindle
Rated pressure
Connecting thread
Hose inner diameter
Air consumption under load
Weight (without accessories)
approx.
Connection to the Air Supply
The air tool is designed for an operating pressure of
6.3 bar (91 psi). For maximum performance, the inner
diameter of the hose is 10 mm with connection
threads of 1/4"NPT. To maintain full performance, use
only hoses with a maximum length of 4 m.
The supplied air must be free of foreign material and
moisture to protect the air tool from damage, contam-
ination, and rust.
The use of a compressed air maintenance unit is
necessary.
This ensures optimum functioning of compressed air
tools. Observe the operating instructions of the main-
tenance unit.
All fittings, connecting lines, and hoses must be di-
mensioned for the required air pressure and volume.
Avoid restrictions in the air supply resulting from, e.g.,
pinching, kinking, or stretching!
In case of doubt, measure the pressure with a pres-
sure gauge at the air inlet with the tool switched on.
3 609 929 937 • (03.10) T
-1
min
W
Hp
mm
in
3/8"–24 UNF–2A
mm
bar/psi
6.3/91
1/4"NPT 1/4"NPT 1/4"NPT 1/4"NPT 1/4"NPT 1/4"NPT 1/4"NPT
mm
l/s
cfm
kg
lbs
4 MOUNTING
... 501
... 502
... 503
2800
2800
2800
320
320
0.43
0.43
6
6
1/4"
1/4"
–
–
q
–
q
–
q
q
12
12
6.3/91
6.3/91
10
10
8.5
8.5
18
18
0.6
0.7
1.3
1.5
Connection of the Air Supply to the Air Tool
Screw the hose nipple 7 into the connector at the air
inlet 5 (see Fig.
To prevent damage to the internal valve components
of the tool, you should use an open end wrench
(22 mm) to apply a counterforce at the protruding con-
nector of the air inlet 5 when screwing/unscrewing the
hose nipple 7.
Loosen the hose clamps 16 of the air inlet hose 17
with a maximum length of 4 m and attach the air inlet
hose over the hose nipple 7 by firmly tightening the
hose clamp.
Always connect the air inlet hose 17 first to the
tool, then to the maintenance unit.
Slip the air inlet hose 17 over the coupling nipple 18
and attach the air inlet hose by firmly tightening the
hose clamp 16.
Screw a quick hose connector 19 into the air outlet of
the maintenance unit 20. Quick hose connectors
make possible a quick connection and, when uncou-
pled, they shut off the air supply automatically.
Take care that you do not start the tool accidentally
when you insert the coupling nipple 18 into the coupler
19.
English–5
... 504
... 505
850
850
320
320
320
0.43
0.43
0.43
–
10
–
3/8"
3/8"
q
–
–
–
q
–
q
q
12
14
6.3/91
6.3/91
10
10
8.5
8.5
8.5
18
18
0.5
0.7
0.8
1.1
1.5
1.8
).
A
... 509
... 511
750
2200
220
220
0.30
0.30
10
10
6
3/8"
1/4"
–
–
–
q
–
–
q
q
–
q
q
q
14
14
12
6.3/91
6.3/91
10
10
10
8.5
8.5
18
18
18
0.8
0.7
1.8
1.5
Werbung
Inhaltsverzeichnis
