Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Please open the foldout page with the
illustration of the tool and leave it open
while you read these operating instruc-
tions.
Intended Use
The drill is designed for drilling in metal, wood, ceram-
ic, and plastic.
Noise/Vibration Information
Measured sound values determined in accordance
with EN ISO 15 744. Measuring inaccuracy 3 dB(A).
Measured vibrational values determined in accord-
ance with EN 28 662 and EN ISO 8662.
Typically the A-weighted sound pressure level of the
product is
:
A
Type 0 607 160 504 / ... 505
Type 0 607 160 509
Type 0 607 160 511
Type 0 607 160 501 / ... 502 / ... 503
The noise level when working can exceed 85 dB(A).
Wear ear protection!
The hand-arm acceleration is typically below 2.5 m/s
Measuring inaccuracy K = 1.2 m/s
Declaration of Conformity
We declare under our sole responsibility that this pro-
duct is in conformity with the following standards or
standardization documents: EN 792, according to the
provisions of the directive 98/37/EC.
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Geschäftsbereich Elektrowerkzeuge
3 609 929 937 • (03.10) T
3 FUNCTION
A
73 dB(A)
74 dB(A)
77 dB(A)
78 dB(A)
2
.
2
.
Dr. Eckerhard Strötgen
Head of Product
Certification
English–4
Product Elements
The numbering of the machine elements refers to the
illustration of the machine on the graphic page.
1 Drill spindle
2 Wrench flats on the drill spindle
3 On/Off switch
4 Right/Left rotation switch
5 Air inlet connector
6 Air outlet with muffler
7 Hose nipple
8 Inner sleeve*
9 Outer sleeve*
10 Sleeve*
11 Chuck key*
12 Tool bit (HSS R metal drill bit)*
13 Chuck jaws*
14 Key-type chuck*
15 Keyless chuck*
16 Hose clamps*
17 Air inlet hose*
18 Coupling nipple*
19 Quick hose connector*
20 Air outlet of the maintenance unit*
21 Open end wrench*
* Optional accessories
Not all the accessories illustrated or described are in-
cluded in standard delivery.
Werbung
Inhaltsverzeichnis
