Safety Notes For Using Pneumatic Devices; User Safety - Parkside PDWE 8 A1 Bedienungs- Und Sicherheitshinweise

Any changes to the pneumatic
maintenance unit exclude liability of
the manufacturer and any connected
damage.
Safety notes for using
pneumatic devices
Important!
Always keep the compressed air
„ z
hose firmly in your hands when
releasing a connection. The lash-
ing backlash of the compressed
air hose may cause injury.
The compressed air maintenance
„ z
unit must be installed before it can
be safely taken into operation. A
stable wall is suitable for installa-
tion (with screw connections).
We recommend only using
„ z
the lubricants specified by the
manufacturer.
Never exceed the indicated
„ z
maximum pressure values of the
maintenance unit.
The pneumatic maintenance unit
„ z
must only be connected to a com-
pressed air source that does not
exceed the working pressure of
8 bar.
Do not put the compressed air
„ z
lines near any heat, oils, heat and
sharp edges.

... / Safety notes for using pneumatic devices

The maintenance unit must only
„ z
be operated in connection with a
pneumatic compressor.
Use of other compressed air
sources, such as a compressed air
cylinder, is forbidden. There is a
danger of fire and/or explosion.
Make sure that children and
„ z
persons with limited physical or
mental capacities are kept away
from the maintenance unit and the
connected compressed air tools.
Only use genuine spare parts for
„ z
repairs. Any non-genuine spare
parts may cause severe damage.
When conducting any mainte-
„ z
nance, setting and repair work,
always disconnect the mainte-
nance unit from the compressed
air supply first.
Changes to the maintenance unit
„ z
are forbidden.
Use the maintenance unit only
„ z
when it is in an impeccable con-
dition. In doubt, use a specialist's
advice.
Have repairs only conducted by
„ z
qualified specialists.

User safety

Try out the pneumatic tool
used before every use. Never
use the compressed air maintenance
unit with any higher operating pres-
sure then indicated in the technical
Table of contents
GB/IE/NI 19