Herunterladen Inhalt Inhalt Diese Seite drucken

Switching The Coffee Machine On; Switching The Coffee Machine Off; Setting The Water Hardness - AEG Electrolux CF 2 Serie Gebrauchsanweisung

Kaffee-espresso-vollautomat
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
0 Fill the water tank with fresh cold
water (Fig. 8).
Pour only fresh cold water in the water
3
tank. Never put in other liquids, e.g.
mineral water or milk.
0 Replace the water tank (Fig. 7). Press
the tank firmly in, to ensure that the
water-tank valve opens.
If the water tank is not in place when
3
the coffee machine is switched on, or
the water level is low, the "Fill water
tank" indicator (Fig. 3, k)
nates. When this indicator is on, coffee
making is not possible or, if started, is
interrupted.
To always be sure of a rich coffee, full
3
of aroma, you should:
• change the water in the water tank
daily
• wash the water tank at least once per
week in normal washing-up water (not
in the dishwasher). Then flush with
fresh water.
2.3
Switching the Coffee Machine
On
0 Switch the coffee machine on by
means of the "On/Off" key (Fig. 3, h)
(Fig. 9). The red indicator light
comes on. While the water is being
heated (approx. 25 seconds) the "Cof-
fee machine heating" indicator (Fig. 3,
i)
flashes.
0 Once the operating temperature has
been reached, the coffee machine car-
ries out an automatic flushing cycle.
The water flows out into the drip tray.
The "Coffee machine heating" indica-
tor (Fig. 3, i)
The coffee machine is now ready to
use.
Immediately after being switched on,
3
during the heating-up phase, the cof-
fee machine runs through a set-up
cycle. The noises this creates are com-
pletely normal.
illumi-
remains constantly on.
2.4
Switching the Coffee Machine
Off
If you switch the coffee machine off
with the "On/Off" key (Fig. 3, h)
after you have finished making coffee,
the machine carries out a flush pro-
gram, during which time the "Empty
grounds container" indicator (Fig. 3, j)
flashes for about 1 minute as a
reminder. If you switch the coffee
machine off with the "On/Off" key (Fig.
3, h)
while a function is running,
all functions are immediately switched
off.
2.5

Setting the Water Hardness

Before using the machine for the first
time or when using a different water
grade, you should set your coffee
machine to the water hardness level
corresponding to the local water hard-
ness. You can used the included test
card to determine the water hardness,
or contact your local water supply
company.
Determining water hardness
0 Dip the test strip in cold water for
around 1 second. Shake off the excess
water, and gauge the hardness by
means of the pink bands.
No pink bands or one pink band:
Hardness 1, soft
up to 1.24 mmol/l, or
up to 7° German hardness, or
up to 12.6° French hardness
Two pink bands:
Hardness 2, medium hard
up to 2.5 mmol/l, or
up to 14° German hardness, or
up to 25.2° French hardness
Three pink bands:
Hardness 3, hard
up to 3.7 mmol/l, or
up to 21° German hardness, or
up to 37.8° French hardness
Four pink bands:
Hardness 4, very hard
over 3.7 mmol/l or
over 21° German hardness, or
over 37.8° French hardness
g
31

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Cf 250

Inhaltsverzeichnis