Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Honeywell
Fault code
50
53
Table 1: Fault codes. See User Manual for detailed fault descriptions
6-EN
Fault Tracing
Fault name
Analogue input Iin < 4mA
(selected signal range 4 to 20
mA)
Fieldbus fault
Note! The fault can be reset by pressing the
Stop button on the control keypad or via
the I/O terminal or fieldbus.
Quick corrective actions
Check the control cabling
- Check installation.
- If installation is correct contact technical
support
18
Werbung
Kapitel
