Inhaltsverzeichnis; Introduction; Intended Use - Parkside PHLG 2000 D3 Originalbetriebsanleitung

GB IE
NI
Content
Introduction ................................ 4
Intended Use ............................... 4
General description ..................... 5
Extent of the delivery ....................... 5
Overview ....................................... 5
Functional description ..................... 5
Technical specifications ................ 5
Safety information ...................... 5
Symbols used in the instructions ........ 5
Symbols on the device ..................... 5
General notes on safety .................. 6
Preparation ...............................6
Using the device ........................6
Use as a solid fuel
lighter / use of the
grill lighter nozzle .....................7
Electrical safety ...........................7
Initial start-up ............................. 7
Operation ................................... 7
Switching ON and OFF ................... 7
Use as a floor-mounted appliance ..... 8
Use of adapter nozzles .................... 8
Restrictor ........................................ 8
Surface nozzle................................ 8
Spatula nozzle ............................... 8
Grill lighter nozzle .......................... 8
Cleaning/maintenance/storage ... 9
General cleaning
and maintenance work .................... 9
Storage.......................................... 9
Waste disposal
and environmental protection ..... 9
Spare parts/Accessories ............ 10
Guarantee ................................ 11
Repair Service ........................... 12
Service-Center ........................... 12
Importer ................................... 12
Translation of the original
EC declaration of conformity ...... 25
4

Introduction

Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product. During production,
this equipment has been checked for qual-
ity and subjected to a final inspection. The
functionality of your equipment is therefore
guaranteed. It cannot be ruled out that
residual quantities of lubricants will remain
on or in the equipment/hose lines in iso-
lated cases. This is not a fault or defect and
it represents no cause for concern.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating
and safety instructions. Use the
product only as described and for
the applications specified. Keep this
manual safely and in the event that
the product is passed on, hand over
all documents to the third party.

Intended Use

The device is suitable for removing coats
of paint, for heating (for example, shrink
tubing), and for plastic deformation and
welding. It can be used to loosen adhesive
joints, defrost water pipes and to ignite
charcoal.
This equipment is not suitable for commer-
cial use. Commercial use will invalidate
the guarantee. Any other use that is not ex-
plicitly approved in these instructions may
result in damage to the equipment and
represent a serious danger to the user.
The use of the device in the rain or a damp
environment is prohibited.