Setting Up; Mains Connection; Operation - Parkside PHD 150 F4 Originalbetriebsanleitung

G B M T
The device itself must not be immer-
sed in open water sources. There
is a risk of personal injury from an
electric shock.
Do not draw in any water from na-
tural accumulations. There is a risk
of contamination from backwashed
cleaning agent.

Setting up

1. Pull the curved handle (1) up as far as
it will go.
2. Connect the high-pressure fitting (jet
gun) (28) to the jet gun (16). Ensure
that the hose runs to the front, so as not
to impede the handle (1).
3. Connect the feed hose to the water
supply and allow water to escape from
the other end of the feed hose with no
bubbles, in order to expel the air from
the feed hose. Switch off the water tap.
4. Connect the feed hose with the help of
the quick connector for garden hose
adapter (25) with the water connection
coupling (13) and the water connec-
tion (14) on the device.
5. Connect to the spray gun (16) by
inserting and screwing in the jet pipe
(20).
6. If the jet pipe (20) is mounted, connect
either the turbo dirt mill (24) or the
standard Vario nozzle (18) by screw-
ing in with the jet pipe (20).
7. Screw in to connect the detergent con-
tainer with nozzle (9) directly to the
spray gun (16). With using the clean-
ing agent container with the nozzle
(9), pour only cleaning agent into the
container. It is sucked in automatically.
The roles of the unit, use the handle
(1) only in conjunction with the
wheels (12). For lifting and carrying
use the carrying handle.
5 2
The width of the jet can be in-
creased by turning the end of the
nozzle to the left. To reduce the
width of the jet, turn the end of the
nozzle to the right.

Mains connection

The pressure cleaner you have acquired
is already fitted with a mains plug. The
equipment is designed for connection to
an earthed wall socket with a residual
current operated device (RCD switch) at
230 V ~ 50 Hz.
Only operate the pressure cleaner
after all the above points have been
observed.
1. Ensure that the pressure cleaner is
turned off by its ON / OFF switch (7).
2. Insert the mains plug into the mains
socket

Operation

Be prepared for the recoil
force of the emitted wa-
ter jet! Ensure that you are
standing firmly and that you
are holding the gun (16) se-
curely, otherwise you could
injure yourself or other
people.
Never operate the pressure cleaner
with a closed water tap. Dry run-
ning will damage the pressure
cleaner!
1. Turn on the water tap entirely.
2. Switch on the pressure cleaner with the
ON / OFF switch (7).
Only ever switch on the pressure clean-
er once you have connected all of the
water pipes and they do not leak.