Herunterladen Inhalt Inhalt Diese Seite drucken

General Cleaning Work; Cleaning The Metal Filter Cage And Pleated Filter; Cleaning The Air Filter; Storage - Parkside PAS 1200 A1 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für PAS 1200 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 66
cleaning agents or solvents. This
could damage the appliance.

General Cleaning Work

Clean the equipment after each use:
Carry out cleaning outside in order to
avoid mess.
Remove the container lid (
empty the metal container (
Clean the metal container (
water and allow it to dry.
After removing the suction hose (
14), clean the dust and soot particles
from the connections. This ensures that
the suction hose (
serted again easily.
Clean the metal filter cage (
and the pleated filter (
low).
Cleaning the Metal filter
cage and Pleated Filter
Replace the pleated filter (16) if it
is worn, damaged or heavily soiled
(see "replacement parts").
1. Take off the container cover
B
C
D
(10).
2. Rotate the folded filter (16) in
L
M
N
an anti-clockwise direction and
remove it. Tap the metal filter
basket (17) carefully to remove
V
W
X
its contents.
3. Tap out the pleated filter (16)
and clean it with a paintbrush
or hand brush.
Don't wash the pleated
(16) filter in water.
4. Place the metal filter basket (17)
on the folded filter (16).
10) and
13).
13) with
14) can be in-
17)
16) (see be-
E
F
G
O
P
Q
Y
Z
5. Place the folded filter (16) and
metal filter basket (17) on the
inverted container cover (10).
6. Screw in the folded filter (16)
tightly in a clockwise direction.
The metal filter
basket (17)
must rest on
the container
cover (10) and press down the
switch of the safety stop (18).

Cleaning the Air Filter

1. Take off the container cover
(10), metal filter cage (
and pleated filter (
2. Take the air filter (19) out of the
filter housing (20).
3. Clean the filter with soap and
water and allow it to dry in the
air.
4. Place the air filter (19) back in
the filter housing (20).

Storage

To store, wind the power cord (1)
around the retaining bracket (6) on the
H
I
container lid (10).
Insert the end of the suction tube (14) in
R
S
the holder provided (4) and tighten it.
Push the suction tube (15) onto the suc-
tion tube holder (2).
Keep the equipment in a dry place, out
of reach of children.
GB
18
17)
16).
J
T
11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis