Herunterladen Inhalt Inhalt Diese Seite drucken

Assembly; Switching On/Off - Parkside PAS 1200 A1 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für PAS 1200 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

• Do not extinguish hot ash par-
ticles with water, as the sudden
temperature differences can
cause cracks in your chimney.
• Use only replacement parts and
accessories supplied and rec-
ommended by our service cen-
tre. The use of foreign parts will
result in immediate invalidation
of the guarantee.
• Have repairs carried out only
by customer service points that
we have authorised.
• Observe the instructions for the
cleaning and maintenance of
the equipment.
• Empty and clean the vacuum
before and after vacuuming in
order to prevent the accumula-
tion in the vacuum of materials
that represent a fire load.
• Keep the equipment in a dry
place, out of reach of children.

Assembly

Disconnect at the plug before carry-
ing out any work on the equipment.
Risk of electric shock!
Before initial use the metal filter
basket (17) and folded filter (16)
are already pre-assembled
1. Place the metal filter basket (17)
on the folded filter (16).
2. Place the folded filter (16) and
metal filter basket (17) on the
inverted container cover (10).
3. Screw in the folded filter (16)
tightly in a clockwise direction.
A
B
C
K
L
M
U
V
W

Switching on/off

The metal filter
basket (17)
must rest on
the container
cover (10) and press down the
switch of the safety stop (18).
If the safety stop (18) is not pressed
down, the device cannot be started.
D
E
4. Place the container cover (10)
on the metal container (13) and
lock it with the locking clips (9)
N
O
5. Connect the suction hose (14).
To do this, insert the rotatable
plastic end piece (with the
X
Y
printed symbol) into the
hose connection (11) and
screw it tight (bayonet con-
nection).
If correctly installed, the symbol
on the suction hose (14) points up-
wards.
When assembling/detaching the
suction hose (14), hold the black
plastic end piece and not the suc-
tion hose (14). Twisting or bending
could damage the hose.
6. Plug the suction tube (15) onto
the rigid end piece of the suc-
tion hose (14).
Connect the mains plug.
The equipment is fitted with a safety
stop (18), which allows operation
only with the pleated filter (16) and
metal filter cage (17) installed cor-
rectly.
GB
18
F
G
H
P
Q
R
Z
49

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis