Setting The Clock; Other Main Functions; Changing The General Settings (Psm); Basic Procedure - JVC KD-S9R Bedienungsanleitung

Setting the clock

You can also set the clock system to either 24 hours
or 12 hours.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 20.)
2
Set the hour.
1 Select "CLOCK H" if not shown on the
display.
2 Adjust the hour.
1
3
Set the minute.
1 Select "CLOCK M."
2 Adjust the minute.
1
4
Set the clock system.
1 Select "24H/12H."
2 Select "24H" or "12H."
1
5
Finish the setting.
To check the current clock time while the unit
is turned off, press DISP (display).
The power turns on, the clock time is shown for
5 seconds, then the power turns off.

OTHER MAIN FUNCTIONS

2
2
2
Changing the general settings
(PSM)
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode) control.

Basic Procedure

1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 20.)
2
Select the PSM item you want to
adjust. (See page 20.)
3
Adjust the PSM item selected above.
4
Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5
Finish the setting.
19