Herunterladen Inhalt Inhalt Diese Seite drucken

Yamaha TT-R125LW(M) Wartung Und Service Seite 386

Inhaltsverzeichnis

Werbung

REAR WHEEL AND REAR BRAKE
5 - 23
2. Install:
Wheel sprocket 1
Lock washers 2
26 Nm (2.6 m · kg, 19 ft · lb)
NOTE:
Tighten the nuts in stage, using a crisscross
pattern.
Bend the lock washer tab.
3. Install:
Collar (left)
Brake shoe plate assembly
Collar (right)
NOTE:
Apply the lithium soap base grease on the oil
seal lip.
4. Install:
Rear wheel
NOTE:
Make sure that the slot a on the brake shoe
plate with the stopper b on the swingarm.
5. Install:
Drive chain 1
NOTE:
Push the wheel 2 forward and install the drive
chain.
6. Install:
Drive chain puller (left) 1
Plain washer 2
Wheel axle 3
NOTE:
Apply the lithium soap base grease on the
wheel axle.
Insert the wheel axle from left side.
CHAS
New

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis