Inhaltsverzeichnis
Werbung
REAR BRAKE ADJUSTMENT/BRAKE PEDAL HEIGHT ADJUSTMENT/
FRONT BRAKE PAD INSPECTION AND REPLACEMENT
REAR BRAKE ADJUSTMENT
1. Check:
Brake pedal free play a
Out of specification → Adjust.
Brake pedal free play a:
20 ~ 30 mm (0.79 ~ 1.18 in)
2. Adjust:
Brake pedal free play
Brake pedal free play adjustment step:
Turn the adjuster 1 until the free play a is
within the specified limits.
CAUTION:
Make sure that there is no brake drag after
adjusting the brake pedal play.
BRAKE PEDAL HEIGHT ADJUSTMENT
1. Check:
Brake pedal height a
Out of specification → Adjust.
Brake pedal height a:
1 mm (0.04 in)
2. Adjust:
Brake pedal height
Pedal height adjustment steps:
Loosen the locknut 1.
Turn the adjusting bolt 2 until the pedal
height a is within specified height.
Tighten the locknut.
FRONT BRAKE PAD INSPECTION AND
REPLACEMENT
1. Remove:
Plug
2. Inspect:
Brake pad thickness a
Out of specification → Replace as a set.
Brake pad thickness a:
Standard
4.0 mm
(0.16 in)
3 - 17
INSP
ADJ
<Limit>
0.8 mm
(0.03 in)
Werbung
Inhaltsverzeichnis
