Introduction; Guarantee - Beko CLEARPOINT S040 Installation Und Betriebsanleitung

Content:

Introduction

These instructions for installation and operation will help
you to become more familiar with the CLEARPOINT
and enable you to utilize the device within the intended
scope of application. Furthermore, the instructions con-
tain important information for ensuring safe, correct and
economic operation.
The individual directions have to be followed precisely
as described in order to avoid hazards or damage. Ad-
ditionally, it will be necessary to observe the accident
prevention regulations valid in the operator's country and
at the place of installation together with the approved
rules of engineering practice concerning correct safety
and work procedures.
All persons carrying out the installation, commissio-ning,
maintenance or repair of the product on the operator's
premises must have read and understood these instruc-
tions for installation and operation. The instructions
should be permanently available at the place of instal-
lation.
4
english
Introduction ................................ 4
Guarantee ................................. 4
Safety rules ................................ 5
Areas of application ..................... 5
Function .................................... 5
Installation ................................. 5
Technical data ............................ 10
Dimensions ................................ 10
Mounting accessories ................... 11

Guarantee

CLEARPOINT water separators are built according to
the state of the art and the approved safety rules of en-
gineering practice. However, the use of the product can
endanger the health & life of attending personnel or third
parties and can have a considerable negative effect on
the product itself or on other material assets if:
- the personnel is not properly trained,
- the product is used for purposes other than the
intended application,
- the device is not correctly serviced or maintained.
This can render the guarantee invalid.
CLEARPOINT devices are designed for gaseous neutral
media without any aggressive substances. Non-observ-
ance of this condition excludes all lia-bility claims.
In the interest of further development,
BEKO TECHNOLOGIES reserves the right to implement
changes at any time, while retaining the essential fea-
tures of the device, if such changes become necessary
to enhance the technical capa-city of the device or for
reasons of safety or standard commercial practice.
CLEARPOINT S040 - M030