Husqvarna TE 250 2007 Werkstatt-Handbuch Seite 542

- Le funzioni, che si possono selezionare nell'ordine, sono le seguenti.
1- SPEED / ODO (figura 1)
2- SPEED / H (figura 2)
3- SPEED / OROLOGIO (figura 3)
4- SPEED / TRIP 1(figura 4)
5- SPEED / STP 1 (figura 5)
6- SPEED / AVS 1 (figura 6)
7- SPEED / SPEED MAX (figura 7)
8- SPEED / TRIP 2 (figura 8)
9- SPEED / TRP 2 / OROLOGIO (figura 9)
10- SPEED / RPM (Indicazione numerica) (figura 10)
1- SPEED / ODO (figura 1)
.................
La funzione RPM visualizzata sull'indicatore LED verticale
è SEMPRE attiva.
- The instrument functions are the following, as shown below.
1- SPEED / ODO (figure 1)
2- SPEED / H (figure 2)
3- SPEED / CLOCK (figure 3)
4- SPEED / TRIP 1 (figure 4)
5- SPEED / STP 1 (figure 5)
6- SPEED / AVS 1 (figure 6)
7- SPEED / SPEED MAX (figure 7)
8- SPEED / TRIP 2 (figure 8)
9- SPEED / TRP 2 / CLOCK (figure 9)
10- SPEED / RPM (engine r.p.m.
numerical value) (figure 10)
1- SPEED / ODO (figure 1)
.................
The RPM function, shown on the vertical LED indicator, is
ALWAYS on.
IMPIANTO ELETTRICO
ELECTRIC SYSTEM
INSTALLATION ELECTRIQUE
ELEKTRISCHE ANLAGE
INSTALACIÓN ELECTRICA
Les fonctions, qu'ils peuvent sélectionner dans l'ordre, sont les
suivante.
1- SPEED / ODO (figure 1)
2- SPEED / H (figure 2)
3- SPEED / MONTRE (figure 3)
4- SPEED / TRIP 1 (figure 4)
5- SPEED / STP 1 (figure 5)
6- SPEED / AVS 1 (figure 6)
7- SPEED / SPEED MAX (figure 7)
8- SPEED / TRIP 2 (figure 8)
9- SPEED / TRP 2 / MONTRE (figure 9)
10- SPEED / RPM (Indication numérique) (figure 10)
1- SPEED / ODO (figure 1)
.................
La fonction RPM, visualisé sur l'indicateur LED vertical,
est TOUJOURS actif.
Die Instrumentefunktionen sind das folgende, und in der Reihenfolge
gezeigt.
1- SPEED / ODO (Bild 1)
2- SPEED / H (Bild 2)
3- SPEED / CLOCK (Bild 3)
4- SPEED / TRIP 1 (Bild 4)
5- SPEED / STP 1 (Bild 5)
6- SPEED / AVS 1 (Bild 6)
7- SPEED / SPEED MAX (Bild 7)
8- SPEED / TRIP 2 (Bild 8)
9- SPEED / TRP 2 / CLOCK (Bild 9)
10- SPEED / RPM (Motor
r.p.m. numerischer Wert) (Bild 10)
1- SPEED / ODO (Bild 1)
.................
Der RPM funktionieren gezeigt auf den senkrechten LED
Anzeiger, bin IMMER angeschaltet.
- Las funciones, que se pueden seleccionar en el orden, son las
partidarias.
1- SPEED / ODO (figura 1)
2- SPEED / H (figura 2)
3- SPEED / OROLOGIO (figura 3)
4- SPEED / TRIP 1(figura 4)
5- SPEED / STP 1 (figura 5)
6- SPEED / AVS 1 (figura 6)
7- SPEED / SPEED MAX (figura 7)
8- SPEED / TRIP 2 (figura 8)
9- SPEED / TRP 2 / OROLOGIO (figura 9)
10- SPEED / RPM (Indicación numerica) (figura 10)
1- SPEED / ODO (figura 1)
.................
La función RPM, visualizada sobre el indicador LED
vertical, es SIEMPRE activa.
M.34 Part. N. 8000 A7735 (07-2006)