Alarm Mode; Setting The Language - Conrad GX107 Bedienungsanleitung

Alarm Mode

The "GX107" has various release possibilities to alarm the user through SMS and email. With
the following command, you can centrally control the alarm functions.
Only "ENABLE" will permit the "GX107" to independently send an SMS and email to the stored
numbers/addresses for the results stored and recognized.
With "DISABLE", the "GX107" will generate only one more SMS to the phone number that has
previously sent an SMS with the right PIN.
Command for switching on the alarm mode:
ALARM ENABLE #1513
Command for switching off the alarm mode:
ALARM DISABLE #1513

After the alarm more is switched off ("DISABLE"), the "GX107" no longer sends
alarm messages. You will then only receive the answer SMS to the command
you sent.
After the alarm more is switched on ("ENABLE"), the "GX107" will continue to
send independently again.

Setting the Language

The "GX107" responds to all SMS commands with a response or report SMS in German. If you
want to receive the responses in English, send the following SMS command to the "GX107":
SET LANGUAGE EN #1513
If you want to switch back to German, send the following SMS command:
SET LANGUAGE DE #1513
64