B) Commands; Status Report - Conrad GX107 Bedienungsanleitung

b) Commands


The following examples assume that the PIN for the SIM card inserted in the
"GX107" is "1513".
According to the PIN set by you, "1513" should be replaced by your PIN.

Status Report

You can check the "GX107" status and parameters. You will receive an SMS to inform you
about battery status, GSM reception, output / input status, voltage, etc.
Command:
STATUS #1513
Response:
GX107 1.XX
- - - - - - - - - - - - - - -
Alarm: off
GSM: 90%
Rechargeable battery: 50%
Zone: off
Voltage: 12.2V
ADC: 0.02V
INT1: low
OUT1: off
OUT2: on
INCALL: OUT1 0s
Name, Version SW
Alarm Mode on / off
GSM signal strength
Rechargeable battery status:
Zone monitoring on / off
Power supply voltage if under 5V,
then in battery mode!
Voltage at the analogue input or temperature
State for Input IN1 "low"/"high"
Output 1 on/off (relay)
Output 2 on/off (transistor)
INCALL connected to OUT1, 0=toggle
63