Conrad GX107 Bedienungsanleitung Seite 62

Examples:
Switching on output 1 (if the "GX107" PIN is 1513):
SET OUT1 #1513
Setting the language (German):
SET LANGUAGE DE #1513
Note regarding the RESET command:
If you want to deactivate a function or reset it due to an error, send a RESET SMS command
with the corresponding function word (2nd word)
RESET <Function> #PIN
This command can be applied universally for all functions/SMS commands!
Example: Switch off output 1
RESET OUT1 #1513
Further Notes:
• You can use small or capital letters; there is no difference.
• Each new command of the same type (2nd word) overwrites the previous settings.
• After each SMS command, the "GX107" sends you an SMS response to confirm the
programming on your mobile phone (if the PIN in the SMS command was correct)..
Button for Manual Reset:
If the device no longer reacts, you can reset it manually. To do so, press the reset key (11).

The previously defined settings are not deleted.
62