Parkside PPS 40 A1 Bedienungs- Und Sicherheitshinweise Und Originalbetriebsanleitung Seite 11

Do not weld on drums or any
„
other closed containers.
Danger from arc beams:
Arc beams can damage your
„
eyes and injure your skin.
Wear a hat and safety
„
goggles.
Wear hearing protection and
„
high, closed shirt collars.
Wear welding safety helmets
„
and filter sizes in perfect
condition.
Wear complete body
„
protection.
Danger from
electromagnetic fields:
Welding current generates
„
electromagnetic fields.
Do not use if you have
„
a medical implant.
Never wrap the welding
„
cable around your body.
Guide welding cables
„
together.
z Welding shield-specific
safety instructions
With the help of a bright light
„
source (e.g. lighter) examine
the proper functioning of the
welding shield prior to starting
with any welding work.
Weld spatters can damage the
„
protective screen. Immediately
replace damaged or scratched
protective screens.
Immediately replace damaged
„
or highly contaminated
or splattered components.
The device must only be
„
operated by people over the
age of 16.
Please familiarise yourself with
„
the welding safety instructions.
To that end, you must also
observe the safety instructions
of your plasma cutter.
Always wear a welding
„
helmet while welding. If it is
not used, you could sustain
severe lesions to the retina.
Always wear protective clothing
„
during welding operations.
Never use the welding shield
„
without the protective screen
because this could damage
the optical unit. There is a risk
of damage to the eyes!
Regularly replace the protective
„
screen to ensure good visibility
and fatigue-proof work.
z Small and moist rooms
Insulating mats and pads
„
must be used when working
in small, moist or hot rooms.
Furthermore, leather gauntlet
gloves or other insulating
Safety instructions
GB/MT 71