Yamaha ATS-1080 Bedienungsanleitung Seite 50

2
Remove the mounting template from the wall, and
then install screws (sold separately) at the points
marked on the wall.
7 to 9 mm
(1/4" to 3/8")
13 to 15 mm
(1/2" to 5/8")
3
Peel off the backing paper from the spacers
(supplied) and attach the adhesive face to the
bottom of the unit.
Spacers
457 mm
(18")
4 to 5 mm
(#8 to #10)
20 mm (3/4")
or more
4
Hang the unit on the screws.
50
En
Mounting holes
on the bottom of
the unit
Touch panel