When Any Problem Appears (Bluetooth®) - Yamaha ATS-1080 Bedienungsanleitung

When any problem appears
(Bluetooth®)
The unit cannot be connected to a
Bluetooth® device
l Bluetooth is not selected as the input source.
Select Bluetooth as the input source. For details, see the
following:
– "Connecting the unit to two Bluetooth devices simultaneously
(multipoint connection)" (p.31)
l The unit is too far away from the Bluetooth device.
Move the Bluetooth device closer to the unit.
l A device emitting electromagnetic waves (such as a
microwave oven, a wireless device and so on) may be located
nearby.
Do not use the unit near devices that emit electromagnetic
waves.
l The Bluetooth device you are using may not support the
A2DP profile.
Use a Bluetooth device that supports the A2DP profile.
l The connection profile registered in the Bluetooth device may
not be functioning correctly for some reason.
Delete the connection profile in the Bluetooth device, and then
connect the Bluetooth device to the unit.
l The passkey for devices such as a Bluetooth adapter is not
"0000".
Use a Bluetooth device with a passkey of "0000".
l The unit is already connected to another Bluetooth device.
(Using a Bluetooth device that has never been connected to
the unit.)
Terminate the current Bluetooth connection, and then connect
to the new device.
l The unit is already connected to two Bluetooth devices.
(Using a Bluetooth device that has been connected to the
unit.)
Terminate one of the Bluetooth connections, and then connect
to the new device.
No sound can be heard, or the sound cuts
off intermittently from a Bluetooth®
device
l The volume on the Bluetooth device may be too low.
Raise the volume on the Bluetooth device.
l Bluetooth is not selected as the input source.
Select Bluetooth as the input source. For details, see the
following:
– "Connecting the unit to two Bluetooth devices simultaneously
(multipoint connection)" (p.31)
l Playback on the Bluetooth device has not been performed.
Perform playback on the Bluetooth device.
l The sound output on the Bluetooth device may not be set to
the unit.
Select the unit as the output destination on the Bluetooth
device.
l The connection to the Bluetooth device was terminated.
Connect with the Bluetooth device one more time.
l The unit may be too far away from the Bluetooth device.
Move the Bluetooth device near the unit.
44
En