Yamaha ATS-1080 Bedienungsanleitung Seite 30

3
Select "YAS-108 Yamaha" (or "YamahaAV") in the
list.
If a passkey (PIN) is required, enter the number "0000".
YAS-108 Yamaha
When the connection between the Bluetooth device and
the unit is established, a completion message is
displayed on the Bluetooth device, and the
BLUETOOTH indicator on the unit glows.
Glows
4
PIN 0 0 0 0
1 2 3
4 5 6
7 8 9
0
NOTE
▪ To terminate the Bluetooth connection, perform one of the following operations.
– Turn off the Bluetooth function on the Bluetooth device.
– Hold down BLUETOOTH for more than 3 seconds.
– Select an input source other than Bluetooth using the input buttons on the unit.
– Turn off the unit.
▪ If the Bluetooth connection is terminated when the unit's input is BLUETOOTH, the
BLUETOOTH indicator flashes and the unit enters the connection wait status.
▪ Adjust the volume level of the Bluetooth device as required.
▪ Perform Bluetooth connection with the Bluetooth device and unit within 10 m (33 ft)
of each other.
▪ See documentation supplied with your Bluetooth device for more information.
30
En
Play back a song on the Bluetooth device.
The unit will begin playing audio from the Bluetooth
device.