Honeywell FT69 Series Technische Daten Und Montageanleitung

GENERAL
Suitable for use as frost-protection thermostats for the pro-
tection of downstream air heaters in ventilation and climate
control systems. Can also be used to control electrical
heating systems and to switch acoustic or optical alarm
signals.
Models
order no. coil length (m)
FT6960-18 1.8
FT6960-30 3.0
FT6960-60 6.0
FT6961-18 1.8
FT6961-30 3.0
FT6961-60 6.0
® U.S. Registered Trademark
Copyright © 2014 Honeywell Inc. • All rights reserved
SINGLE-STAGE FROST PROTECTION THERMOSTATS
bulb reset
with bulb
without bulb manual
without bulb
with bulb
without bulb automatic
without bulb
FT69 Series
SPECIFICATION DATA & MOUNTING INSTRUCTIONS
FEATURES

Gas-filled copper sensor element with 1.8 m, 3 m, or
6 m coil length

Dust-tight micro switch with switching contacts
(heat/cool)

Easy installation and wiring

Manual reset (FT6960) or automatic reset (FT6961)

°C and °F scale
SPECIFICATION
Switching capacity (Ag contact)
Humidity
Adjustable temp. range
Storage temperature
Operating temperature
Cooling of capillary coil
Max. overload temperature
Hysteresis
Reproducibility
Protection class
Protection type
Wiring terminals
Cable entry
Housing materials
Weight
Dimensions (incl. cable gland)
24...250 Vac; 16(8) A
10...90% rh, non-
condensing
-8...+8 °C (+18...+46 °F)
-30...+60 C (-22...+140 °F)
-20...+55 °C
30 cm (min.)
150 °C (max. 1 hr)
2 K
± 1 K
I
IP65 as per EN60529
Screw terminals for wires of
up to 1.5 mm² cross-section
M20x1.5, for  6...13 mm
ABS and polycarbonate
320 g
140 x 62 x 65 mm
MU0B-0645GE51 R0914