Parkside PLS 48 D2 Gebrauchanleitung Seite 25

Children must never play with the device . Cleaning
and user maintenance must never be carried out by
children without supervision .
If the mains supply cable of this device gets dama-
„
ged, it must be replaced by the manufacturer or its
customer service or by a similarly qualified person
in order to avoid hazards .
RISK OF BURNS! Before using, check that the tool
„
tip is properly attached to the device . Never touch
the heated soldering tip or the molten solder . There
is a risk of burns . The device must be allowed to
cool down before changing, cleaning or checking
any components . The hot tool tip and its mounting
must not come into contact with skin, hair, etc . Risk
of burns .
After working, allow the soldering iron to cool down
„
only in the air . Under no circumstances quench with
water!
CAUTION! DANGER OF FIRE! Only use the
„
multifunctional holder to put down the hot soldering
iron .
22
| GB | IE
CAUTION DANGER OF ELECTRIC
SHOCK! Do not use the soldering
station if the handle, power
cable or plug are damaged .
Never open the device!
PLS 48 D2