HAPRO INNERGIZE HP8550 Bedienungsanleitung Seite 8

ENGLISH
10
Note: By setting a new time, you can avoid the 3-minute waiting time which is necessary to let
the tanning lamps cool down after they have switched off. This 3-minute waiting time does not
apply to the infrared lamps.
- During the last minute of the tanning or relax session, you can press the SNOOZE button to
enjoy the warmth of the infrared lamps for 9 more minutes. You can press the SNOOZE
button as often as you like. (Fig. 18)
Adjusting functions
- The function selection button shows the different functions. (Fig. 19)
1 Press the function selection button to switch from function to function. (Fig. 20)
The symbol that turns yellow shows the function you have selected.
2 Choose:
- symbol ¥ if you want to tan your whole body
- symbol ¼ if you want to tan a specific part of your body*
- symbol Ø if you want to relax
- symbol if you want to warm up a part of your body*
×
* One side of the lamp unit goes on.
Setting the time for a tanning or relax session.
1 Consult the chapters 'Tanning and your health' and 'Relaxation and your health' for the
correct tanning or relax time.
2 Turn the time-selection ring to set the time of the tanning or relax session (Fig. 21).
Turn the ring clockwise to increase the time and turn it anticlockwise to decrease the time.
Interrupting the tanning or relax session
- To interrupt a tanning session, press the pause button (
The lamps go out. The cool-down time of 3 minutes flashes on the display and counts down.
During these 3 minutes, the lamps cool down. When the time has counted down to 0 and
stops flashing, you can switch the appliance back on. Press the START/STOP button or the
pause button ( ã ) to start the countdown of the remaining session time.
- To interrupt a relax session, press the pause button (
The lamps are switched off and the pause symbol and the remaining time appear on the
display. The waiting time does not apply to the infrared lamps, so you can switch the appliance
back on whenever you want. Press the STOP/START button or the pause button (
countdown of the remaining time.
Changing the tanning or relax time during a session
- To change the set time during a tanning session, press the START/STOP button (Fig. 24).
The lamps are switched off. Set a new time with the time-selection ring. Wait until the set time
stops flashing (this takes 3 minutes because the lamps have to cool down first). Then press the
START/STOP button to switch the appliance back on.
- To change the set time during a relax session, turn the time-selection ring. The cool-down
time of 3 minutes does not apply to the infrared lamps.
Remote control (HP8565 only)
Use the remote control to perform the following actions. See also section 'Tanning or relaxing
(HP8565)':
- start/stop the session
- see the remaining session time
- pause the session
- repeat the session
- snooze
). (Fig. 22)
ã
ã ). (Fig. 23)
ã ) to start the