Troubleshooting - Silvercrest SMRB 40 A1 Bedienungsanleitung

Troubleshooting

The sound bar does not power on.

Check that the power switch located on the back panel of the sound bar is switched to "ON".

Check that the power adapter is correctly inserted into the power socket. Connect it properly if
not.

Check whether the used power socket is alive. Try a different power socket, if necessary.
No sound

Please check if the correct playback mode has been selected. Select the proper playback
mode first.

Check the volume setting.

For "AUX IN" mode: Make sure to connect the Cinch/RCA cable (H) to the AUDIO IN jacks
(12, 13) of your sound bar and to the corresponding jacks of the external playback device.
Please also check the volume setting of the external playback device connected via audio
cable.

For "Optical" mode: Make sure to connect the Toslink cable to the SPDIF digital input (15) of
your sound bar and to the corresponding jack of the external playback device.

There might be no signal reception. Double-check the network settings.
Router connection problems

You have entered a wrong network encryption key. Double-check the encryption key and enter
it again.

If you are using a network cable to connect the sound bar to your router, make sure that the
network cable is properly inserted into the LAN ports of the sound bar and the router.
Cannot control the sound bar with the app

The sound bar and the smartphone or tablet PC are not connected to the same wireless
network. If necessary, correct the network settings of the corresponding devices.
Cannot control the sound bar with the remote control

The remote control batteries are low or empty. Replace them with new batteries of the same
type.

The distance between the sound bar and the remote control is too high, reduce it.
Playback via Bluetooth

On your smartphone / tablet PC, check if there is a Bluetooth
SMRB 40 A1 sound bar. If necessary, repeat the pairing.
®
does not work
SilverCrest SMRB 40 A1
®
connection established to the
English - 63