Re-Establishing A Connection; Switching Audio Sources - Sentiotec Prod-Bt-B Montage- Und Gebrauchsanweisung

Instructions for use

5.7. Re-establishing a connection

The Bluetooth connection between the audio source and the ProD Bluetooth is
automatically re-established when
● the audio source was out of range of the ProD Bluetooth.
● The Bluetooth function of the audio source was turned off and you turn
it back on again.
If you have manually disconnected the Bluetooth connection between the audio
source and ProD Bluetooth at the audio source, you must manually re-establish
the Bluetooth connection to the audio source (see "5.4. Pausing/resuming music
playback" on page 12).

5.8. Switching audio sources

Switch to a new (not previously paired) audio source
This is how to pair the ProD Bluetooth with a new audio source:
1. Disconnect the Bluetooth connection between the previous audio source
and the ProD Bluetooth. Follow the operating instructions for your device.
● Press the Play/Pause button 3 on the ProD Bluetooth for 3 seconds.
The indicator LED 1 flashes alternately red and blue (pairing mode)
► The ProD Bluetooth can now establish a connection to a different audio
source for the first time (pairing – see 5.2 on page 11).
Only one device can be actively connected to the ProD Bluetooth at a time.
p. 13/18
EN