Residual Risks; Before Use; Fitting The Universal Stirrer (See Fig. A); Removing The Universal Stirrer - Parkside PFMR 1400 D3 Originalbetriebsanleitung

Residual risks

Even if you operate this power tool properly,
there will still be residual risks. The following
risks can occur in relation to the power tool's
design and structure:
■ Lung damage, if no suitable breathing protec-
tion is worn.
■ Hearing damage, if no suitable hearing protec-
tion is worn.
■ Damage to health caused by vibrations if the
appliance is used for extended periods or is
not properly used and maintained.
■ Crushing injuries, if you come into contact with
rotating parts.
■ Risk of electric shock! Hold the appliance by the
insulated handles when you are carrying out
work during which the deployed tool may come
into contact with concealed power cables or its
own power cable. Contact with a live cable can
also make metal parts of the appliance live and
could result in an electric shock.
WARNING!
► The power tool creates an electromagnetic
field during operation. This field can, in
certain circumstances, impair active or pas-
sive medical implants. To reduce the risk of
fatal injuries, we recommend that people with
medical implants consult their doctor and the
manufacturer of the medical implant before
operating this machine.
PFMR 1400 D3

Before use

♦ Always remove the mains plug from the wall
socket before making any settings on the
appliance.
Fitting the universal stirrer (see fig. A)
♦ Screw the mixing spiral
.
7b
♦ Afterwards, screw the universal stirrer
the agitator shaft with M-14 internal thread
♦ To do this, hold the agitator shaft
an assembly spanner
♦ Now tighten the universal stirrer
second assembly spanner

Removing the universal stirrer

♦ Proceed in reverse order to remove the universal
stirrer .

Fitting the stand/hanger

♦ Fit the stand/hanger
the four supplied Phillips-head screws (see fig. C).

Using the stand/hanger

♦ Use the stand/hanger
ance or stand it on the floor. In this way, you
can protect it from soiling.
firmly onto the shaft
7a
into
firmly with
.
with the
fest.
to the handle using
to hang up the appli-
GB 13
│
.
■