Safety Notes; Recycling And Disposal; Declaration Of Conformity; Switch-On - Blaupunkt 7 607 548 500 Handbuch

ENGLISH
We provide a manufacturer's warranty for our
products purchased within the European Union.
You can view the warranty terms at www.blau-
punkt.de or request them directly from:
Blaupunkt GmbH
Hotline
Robert Bosch Str. 200
D-31139 Hildesheim

Safety notes

Before drilling holes for mounting, ensure that
no routed cables or vehicle components are
damaged!
Do not install the USB socket, microphone and PTT
button in the deployment area of the airbag, and
ensure that the tray is safe and solid so that passen-
gers in the vehicle are not at risk during emergen-
cy braking. Use cable glands for holes with sharp
edges.
The negative terminal on the bat-
tery must be disconnected while
the device is being installed and
connected.
Observe the safety notes from the vehicle manu-
facturer (airbag, alarm systems, on-board com-
puters, immobilisers).

Recycling and disposal

Please use the return and collection systems avail-
able to dispose of the product.

Declaration of conformity

The Blaupunkt GmbH declares that the Bluetooth/
USB Interface device complies with the basic re-
quirements and the other relevant regulations of
the directive 1999/5/EG.
24
Dear customer,
the fi rmware "SW8625" for the Bluetooth USB in-
terface (BT-USB interface, 7607 545 500 001)
is now available and provides several new func-
tions that we would like to explain below.
A signifi cant innovation since SW8625 is the sup-
port for the OLED display (7 607 548 500 001).
Note:
Bluetooth USB interfaces with hardware version
"1" (index "AC" or higher) can be retrofi tted with
the OLED display.
Unfortunately, this is not possible for older in-
terfaces with hardware version "0".
The hardware version of your interface can be
found without uninstalling the interface by using
the fi le "id.txt", see the instructions Reading
out technical data.
Caution:
Before startup of the OLED display, it is neces-
sary to update the fi rmware of your BT-USB in-
terface (see the (see the section Software update).
The following instructions assume that the
fi rmware of your BT-USB interface has already
been updated, and the language was set to English
(see the section Settings menu).
This fi rmware can also be used with your PTT like
the previous versions. The OLED-specifi c control
and display options listed below are not available
in this case.

Switch-on

The OLED display switches on automatically as
soon as you switch on your radio or radio naviga-
tion device (RNS).

Switch-off

The OLED display switches off automatically as
soon as you switch off your radio or radio naviga-
tion device (RNS).
Software update).