Motor Protection Filter; Handling And Transportation; Hepa Filter - Beko VCC34802AB Anleitung

4 Cleaning and care

4.2.1 Motor protection filter

1. Open the top lid by pressing the dust container
opening latch (8).
2. Press down on the latch of the filter cassette to
remove the cassette.
3. Remove the motor protection filter from the
cassette inside.
4. After washing the motor protection filter under
running water, wring it out slightly and let it dry
(for 24 hours minimum).

4.2.2 HEPA filter

1. Raise the filter cap in the arrow direction to
open it.
2. Remove the HEPA filter by pulling it from its
handle.
3. Shake off the HEPA filter to eliminate the dusts
on it. After that, you can wash it by holding its
clean side under running cool water.
4. If you wash the HEPA filter, dry it at room
temperature (for 24 hours minimum). Do not
use it before ensuring that it is completely dry.
12 / EN
4.3 Storage
• If you do not intend to use the appliance for a
long time, store it carefully.
• Unplug the appliance.
• Keep the appliance out of the reach of children.
4.4 Handling and
transportation
• During handling and transportation, carry
the appliance in its original packaging. The
packaging of the appliance protects it against
physical damages.
• Do not place heavy loads on the appliance or on
the packaging. The appliance may get damaged.
• Dropping the appliance may render it non-
operational or cause permanent damage.
Vacuum Cleaner / User Manual