Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Notes; General - Honeywell BUS-2 Montage, Anschluss, Anleitung

Trennmodul
Vorschau ausblenden Andere Handbücher für BUS-2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

10
Table of contents
Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
1. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2. Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3. Planning guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4. Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5. Installation guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6. Connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7. Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Safety notes

Read the instructions carefully and thoroughly before installing the device and putting it into
operation. They contain important information on assembly, programming and operation
The device is a state-of-the-art product. Only use the device:
- In accordance with regulations and
- When it is in a technically correct state
- In accordance with technical data.
The manufacturer is not responsible for damage that is caused by use not in accordance with
regulations.
Installation, programming as well as maintenance and repair work may only be carried out by
authorized, skilled personnel.
Soldering and connection work should only be carried out inside the entire system when it is de-
energized.
Soldering work should only be carried out using a temperature-controlled soldering bit that is
galvanically isolated from the power supply.
Observe the VDE instructions as well as the regulations of the local power company.
Do not use the device in a potentially explosive environment or in rooms with metal or
plastic decomposing vapours.
1.

General

With the
"loop
module BUS-2 (Item no. 013220.07.10) a BUS-2
realized in conjunction with the separating modules
reliability. The separating module can be used together with
Use in the loop:
If an error occurs in the BUS-2 loop, the defective part is disconnected and all remaining users
continue to function fully.
Use in the stub:
If separating modules are used in a BUS-2 stub, the bus continues to function fully up to the
separating module before the point where the fault occurred.
Mounting and Connection Instructions - Separating Module BUS-2
"
loop
and/or stub system can be
BUS-2
which has extremely high operational
loop
and stub bus systems.
Page

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis