General Guidelines - Velleman VTHD05 Bedienungsanleitung


Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power
tool. Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the operation of
the power tool. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.

Hold the power tool by the insulated gripping surfaces when performing an
operation where the cutting accessory may contact hidden wiring or its
own cord. A cutting accessory contacting a live wire may make exposed metal
parts of the power tool live and could give the operator an electric shock.

Use the power tool, accessories and tool bits, etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
Service

Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power tool is
maintained.
3.

General Guidelines


Refer to the Velleman
manual.

All modifications of the device are forbidden for safety reasons. Damage caused by
user modifications to the device is not covered by the warranty.

Only use the device for its intended purpose. Using the device in an unauthorised
way will void the warranty.

Damage caused by disregard of certain guidelines in this manual is not covered by
the warranty and the dealer will not accept responsibility for any ensuing defects or
problems.

Nor Velleman nv nor its dealers can be held responsible for any damage
(extraordinary, incidental or indirect) – of any nature (financial, physical...) arising
from the possession, use or failure of this product.

Keep this manual for future reference.
4. Overview
Refer to the illustrations on page 2 of this manual.
1
2
3
V. 02 – 30/10/2018
® Service and Quality Warranty on the last pages of this
housing cap
collet nut
shaft lock button
VTHD05
4
5
6
5
carbon brush cover
speed dial
on-off switch
©Velleman nv