Christopeit Sport KICKER ROMA Bedienungsanleitung Seite 9

Assembly Instructions
Before beginning with assembly, observe our recommendations
and safety instructions!
Remove all parts from the carton and assemble the kicker on a soft and
clean surface – if necessary, place the transport carton underneath to avoid
damaging/scratching the parts. You can shorten up the assembling time by
using an electric. Screw driver with cross head bit if you have.
Step 1:
Assembly of main frame.
Put the long side boards (2) and short side boards (3) together as shows
in picture and tighten them with screws 5/16x38 mm (29) and washers (27)
firmly.
Step 2:
Assembly of playing field.
Put the playing field (1) into the pre-assembled main frame in the right way
and tighten it with screws 4x30 mm (31).
9