Märklin 60948 Handbuch Seite 44

CV
Explanation
64 PoM Brake squealing threshold
66 PoM Forward trim
67 PoM
Speed table speed level 1 (Vmin) to
-
speed table speed level 28 (Vmax)
94 PoM
95 PoM Reverse trim
112 PoM Physical output (mapping): front light mode
113 PoM Physical output (mapping): front light dimmer
114 PoM Physical output (mapping): front light period
bis Physical output (mapping): rear light,
135 PoM Aux 1 to Aux 6 (each one in the 3rd block)
PoM
136 ABV (acceleration/braking delay)
137 PoM Switching range
PoM must be supported by the locomo-
tive controller / central controller.
44
CV Table for DCC
Values
Default
0 - 255 55
0 - 255 128
0 - 255
0 - 255 128
0 - 16
0 - 255 255
0 - 255 20
1 -7
0 - 128 128
* An extensive table for function mapping can be found on the Internet at:
www.maerklin.de/de/produkte/tools_downloads/technische_infos.html
Notes
The higher the value the sooner the
squealing begins, the lower the value the
later the squealing begins. If the value is
too low, no squealing is activated.
The CV value divided by 128 gives the fac-
tor with the speed level is multiplied when
the locomotive is running forward.
The CV value divided by 128 gives the fac-
tor with the speed level is multiplied when
the locomotive is running in reverse.
1
See table*
See table*
Not used
0
128 = 50% of speed level, 64 = 25% of
speed level