Märklin 60985 Handbuch Seite 45

CV
Explanation
56 PoM Motor feedback control – feedback control influence
Steam locomotive sound interval of the steam
PoM
57
chuffing at speed level 1
Steam locomotive interval of the steam chuffing
58 PoM
starting at speed level 2,
63 PoM Total volume
PoM
64 Brake squealing threshold
66 PoM Forward trim
67 PoM Speed table speed level 1 (Vmin) to
-
94 PoM speed table speed level 28 (Vmax)
95 PoM Reverse trim
145 PoM Switching range
146 PoM Sound output: Volume of squealing brakes
PoM must be supported by the locomotive controller / central controller.
CV Table for DCC
Values
Default
0 - 255 255
30
0 - 255
0 - 255 90
0 - 255 255
35
0 - 255
0 - 255 128
0 - 255
0 - 255 128
0 - 128 128
0 - 255 180
Notes
0 = PWM without feedback control for
Sine (see also CV 52 motor type)
Total volume for all sounds.
0 = no sound
The higher the value the sooner the
squealing begins, the lower the value the
later the squealing begins. If the value is
too low, no squealing is activated..
The CV value divided by 128 gives the fac-
tor with the speed level is multiplied when
the locomotive is running forward.
The CV value divided by 128 gives the fac-
tor with the speed level is multiplied when
the locomotive is running in reverse.
128 = 50% of speed level, 64 = 25% of
speed level
45