Care And Maintenance - prologue IW007 Bedienungsanleitung

• The main unit will compare the current pressure with the average readings from
the previous hour.
• The icon will change if the current reading rises or falls by more than 2 mbar.
• Press [ HISTORY ] repeatedly to view the pressure for the last 19 hours.
• If no button is pressed within 5 seconds the main unit reverts to displaying
the current pressure.
Viewing the max/min readings
1. Press [ MAX/MIN ] once to display the maximum indoor/outdoor temperature and
maximum wind speed.
2. Press [ MAX/MIN ] once more to display the minimum indoor/outdoor temperature
and minimum wind speed.
3. Press [ MAX/MIN ] once again to return to normal display mode.
4. If no button is pressed within 5 seconds the main unit returns to
normal display mode.
Resetting the max/min readings
1. Press [ MAX/MIN ] to display the maximum indoor/outdoor temperature and
maximum wind speed.
2. Hold in [ MAX/MIN ] for 2 seconds to reset the readings for the maximum
indoor/outdoor temperature and maximum wind speed to zero.
3. "- - -" will appear in the display for 2 seconds.
4. Press [ MAX/MIN ] once more to display the minimum indoor/outdoor temperature
and minimum wind speed.
5. Hold in [ MAX/MIN ] for 2 seconds to reset the readings for the minimum indoor/
outdoor temperature and minimum wind speed to zero.
6. "- - -" will appear in the display for 2 seconds.
7. Press [ MAX/MIN ] once again to return to normal display mode.
8. If no button is pressed within 10 seconds the main unit returns to
normal display mode.

Care and maintenance

• Clean the weather station using a lightly moistened cloth. Only use mild cleaning
agents, never solvents or corrosive chemicals.
• For optimum results, the batteries in all the units should be replaced regularly.
• Never mix old and new batteries.
14