Care And Maintenance; Troubleshooting Guide - prologue IW006-DCF Bedienungsanleitung

Multiple display mode
1. Press [ ▲ CHANNEL ] until channel 1 flashes in the display. The readings
from all connected sensors will now appear in turn.
2. Press [ ▲ CHANNEL ] again to only show readings from channel 1.

Care and maintenance

Clean the weather station using a lightly moistened cloth.
Only use mild cleaning agents, never solvents or corrosive chemicals.

Troubleshooting guide

The weather station
doesn't work.
The display doesn't
come on.
Incorrect or
unreadable values
on the display.
No readings from
the connected
sensors are shown.
The display shows
"---".
The display shows
"HH.H/LL.L".
• Make sure that the mains adaptor and its lead
are undamaged and securely connected both
to a wall socket and the weather station.
• Check that the wall socket is live.
Press [ RESET ] (20) on the back of
the weather station.
• Try moving the sensors to a different location.
• Make sure the sensor is set to the correct
channel and that its batteries are not flat.
• Press [ RESET ] on the front of the sensor.
• Follow the instructions listed in the Quick
start section or in the Connecting 2 additional
outdoor sensors section above.
• The measured temperature lies
outside the weather station's range.
See the Specifications section below.
12