Grundig GSBS11120X Bedienungsanleitung Seite 28

1. Freezer compartment
temperature setting
Pressing the button ( ) number
(1) will enable the freezer
compartment temperature to be
set at -18,-19,-20,-21 ,-22,-23,-24,-
18...
2. Economy mode
Indicates the refrigerator is
running on energy-saving mode.
This indicator will be active
when the freezer compartment
temperature is set at -18 or the
energy-saving cooling is engaged
by eco-extra function. (
3. Error status
This sensor will activate if
the refrigerator is not cooling
adequately or in case of sensor
fault. ( )
When this indicator is activated,
the freezer compartment
temperature indicator will display
"E" and the cooler compartment
temperature indicator will display
"1, 2, 3..." etc. numbers. The
numbers on the indicator serve to
inform the service personnel about
the fault.
4. Cooler compartment
temperature setting
After pressing the button (
) number (4), the cooler
compartment temperature can be
set to 8,7,6,5,4,3,2.. respectively.
5. Rapid cooling
For rapid cooling , press the button
number (5); this will activate the
rapid cooling indicator (
Press this button again to
deactivate this function.
28
Use this function when placing
fresh foods into the cooler
compartment or to rapidly cool the
food items. When this function is
activated, the refrigerator will be
engaged for 1 hour.
6. Vacation function
When the Vacation function ( )
is active, the cooler compartment
temperature indicator displays
the inscription "- -" and no cooling
process will be active in the cooling
compartment. This function
is not suitable to keep food in
)
the cooler compartment. Other
compartments will remain cooled
with the respective temperature
set for each compartment.
Press the vacation function button
again to cancel this function. ( )
7. Keypad lock / Keypad lock / filter
replacing alert cancellation
Press keypad lock button ( ) to
activate the keypad lock. You may
also use this function to prevent
changing the refrigerator's
temperature settings. The
refrigerator's filter must be
replaced every 6 months. If you
follow the instructions in the
section 5.2, the refrigerator
will automatically calculate the
remaining period and the filter
replacing alert indicator ( ) will
light up when filter expires.
Press and hold the button ( ) for
3 seconds to turn off the filter alert
light.
).