Herunterladen Inhalt Inhalt Diese Seite drucken

Installation; Right Place For Installation; Attaching The Plastic Wedges; Adjusting The Stands - Grundig GSBS11120X Bedienungsanleitung

Gsbs1 serie;
Vorschau ausblenden Andere Handbücher für GSBS11120X:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

3. Installation

3.1 Right place for installation

Contact the Authorized Service for
the product's installation. To ready
the product for installation, see the
information in the user guide and
make sure the electric and water
utilities are as required. If not,
call an electrician and plumber to
arrange the utilities as necessary.
WARNING:
manufacturer assumes
B
no responsibility for
any damage caused by
the work carried out by
unauthorized persons.
WARNING:
power cable must
B
be unplugged during
installation. Failure to do
so may result in death or
serious injuries!
WARNING:
span is too narrow for the
A
product to pass, remove
the door and turn the
product sideways; if this
does not work, contact
the authorized service.
3.2 Attaching the
plastic wedges
Use the plastic wedges in the
provided with the product to
provide sufficient space for air
circulation between the product
and the wall.
12
The
The product's
If the door

3.3 Adjusting the stands

If the product is not in balanced
position, adjust the front adjustable
stands by rotating right or left.
1.
To attach the wedges, remove
the screws on the product and
use the screws provided with
the wedges.
2.
Attach 2 plastic wedges on the
ventilation cover shown as j in
the figure.

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis