Philips Provapor GC6265 Bedienungsanleitung Seite 8

ENGLISH
8
C
3 Pour water into the steam tank (max. 1 litre).
Use tap water to fill the tank up to the maximum level.
If the tap water in your area is very hard, we advise you to mix tap
water with an equal portion of distilled water, or to use distilled water
only.
Do not use perfume, vinegar, starch or chemically descaled water.
4 Screw the cap tightly onto the filling aperture of the steam
tank.
Fast refill
C
1 First set the on/off switch (D) to 'off'.
C
2 Press the steam activator button until you no longer hear any
steam escaping from the appliance.
3 Keep the steam activator button pressed in and slowly unscrew
the cap of the steam tank by turning it anti-clockwise.This will
depressurise the steam tank.
Make sure there is no remaining steam left in the steam tank. Place a
piece of rug over the cap while unscrewing.
4 Remove the mains plug from the wall socket.
5 Fill the steam tank as described in section 'Filling the steam
tank' and let the appliance heat up again.
Label with ironing
instructions
B
C
D
Z
Type of fabric
Synthetic fabrics, e.g. acetate,
acrylic, viscose, polyamide,
polyester, and silk
Wool
Cotton, linen
Please note: Z in the table
means that the article
cannot be ironed.
Temperature Steam
dial control
1
-
2
q
3 R