Herunterladen Inhalt Inhalt Diese Seite drucken

Function Selection; Maintenance And Cleaning; Disposal - Parkside PDSB 10 A1 Originalbetriebsanleitung

Druckluft-saug-/ blaspistole
Vorschau ausblenden Andere Handbücher für PDSB 10 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Function selection

You can use the appliance in two operating modes:
using the blow­out function:
Turn the function selection wheel
▮ notch on the top of the appliance is pointing
to the ▲ BLOW marking on the function selec­
tion wheel
.
using the vacuum function:
Turn the function selection wheel
▮ notch on the top of the appliance is pointing
to the ▲ VAC marking on the function selection
wheel
.

Maintenance and cleaning

WARNING! RISK OF INJURY!
Disconnect the appliance from the
compressed air supply.
CAUTION!
Before maintenance, clean off any hazardous
substances that may (due to working pro­
cesses) have accumulated on the appliance .
Avoid all skin contact with these substances .
If the skin comes into contact with hazardous
dusts, this can lead to severe dermatitis .
If dust is produced or swirled up during
maintenance, it can be inhaled .
NOTE
To ensure correct functioning and long­term
durability of the appliance, pay attention to the
following points:
Use only the genuine replacement parts rec­
ommended by the manufacturer, otherwise you
could put users at danger . In doubt, contact the
Service Centre .
Clean the tool with a soft, dry cloth only .
Never use sharp or scratchy cleaning agents
under any circumstances .
PDSB 10 A1

Disposal

so that the
Do not dispose of the appliance in the normal
domestic waste!
Your local community or municipal authorities can
provide information on how to dispose of the
worn­out appliance .
so that the
The packaging consists of environmentally
friendly material . It can be disposed of in
the local recycling containers .
Dispose of the packaging in an en­
vironmentally friendly manner .
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary .
The packaging material is labelled
with abbreviations (a) and numbers
(b) with the following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites
Your local community or municipal
authorities can provide information
on how to dispose of the worn­out
product .
GB │ MT
 21

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis