Technical Data; Safety Instructions; Symbols In The Manual; Symbols On The Appliance - Parkside POF 1200 C2 Originalbetriebsanleitung

GB IE
37 Spring, collet chuck

Technical data

Router Cutter ........................ POF 1200 C2
Rated input voltage .......... 230 V~, 50 Hz
Idling speed n ..........11000-30000 min
0
Power input ..............................1200 W
Plunge depth ............................... 55 mm
Tool holder .......................... 6 mm/8 mm
Protection class .................................
Protection category........................... IPX0
Weight (incl. accessories) ...approx. 3.3 kg
Sound pressure level
(L ) ....................... 90 dB(A); K
pA
Sound power level
(L ) ................... 101 dB(A); K
WA
Vibration (a ) .......... 5.4 m/s
h
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
24

Safety instructions

Ensure that the safety instructions are ob-
served when operating the appliance.
-1

Symbols in the manual

II
=3 dB
pA
=3 dB
WA
; K=1.5 m/s
2 2

Symbols on the appliance

turned off and times when the tool
is turned on but is running idle).
Warning symbols with in-
formation on damage and
injury prevention.
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock.
Instruction symbols with information
on preventing damage.
Wear protective gloves.
Remove the plug from the mains.
Help symbols with information on
improving tool handling.
Attention!
Pull out mains plug immediately, if
the mains cable is damaged, entan-
gled or severed.
Always remove the mains plug be-
fore working on the device.
Read the manual.
Wear ear protection.