Initial Use - Beko HBA7753X Anleitung

Operation
3

3.3 Initial use

1. Clean the appliance parts before
initial use (see 4.1).
2. Use the appliance upright on
a balanced, flat, clean, dry and
non-skid surface.
3. Do not use the appliance
continuously for more than 10
seconds. Turn off the device
when used for more than 10
seconds and wait for 1 min.
before operating again.
When you do not
exceed 10 seconds
in intermittent uses,
C
you can operate the
appliance until the
end of the process by
waiting for a couple
of seconds.
10 / EN
3.4 Blending and
chopping with the
blending shaft
1. Insert blending shaft (13), by
aligning ( ) symbol on motor
unit (3) with ( ) symbol and tur-
ning clockwise.
– Make sure ( ) symbol is
aligned with ( ) symbol. Fit it
into its place, do not apply too
much force.
2. Put processed ingredients (in
small pieces) in measuring con-
tainer or a container that you
will use.
3. Immerse blending shaft (13) into
the container.
4. Plug in the appliance.
5. Run the appliance by pressing
operation button (2).
Turn speed adjust-
C
ment button (1) to
gradually
speed.
Hand Blender/User Manual
increase