Safety Notes; Functions; General Notes - Märklin 58119 Bedienungsanleitung

Safety Notes

• Use only switched mode power supply units and transfor-
mers that are designed for your local power system.
• This car must never be supplied with power from more
than one transformer.
• Pay close attention to the safety notes in the
instructions for your operating system.
• Do not expose the model to direct sunlight, extreme
changes in temperature, or high humidity.
• The LEDs in this item correspond to Laser Class 1 accor-
ding to Standard EN 60825-1.

General Notes

• The operating instructions and the packaging are a com-
ponent part of the product and must therefore be kept as
well as transferred along with the product to others.
• Please see your authorized Märklin dealer for repairs or
spare parts.
• Disposing: http://www.maerklin.com/en/imprint.html

Functions

• Recognition of the mode of operation: automatic.
• Mfx technology for the Mobile Station/Central Station.
Name set at the factory: Pwg 132 543
Address set at the factory: (Märklin) 79 / (DCC) 3
• Setting the parameters electronically with the Control
Unit, Mobile Station or Central Station.
Note:
The digital protocol with the most possibilities is the highest
order digital protocol. The sequence of digital protocols in
descending order is:
Priority 1: mfx
Priority 2: DCC
Priority 3: MM
If two or more digital protocols are recognized in the track,
the decoder automatically takes on the highest value digital
protocol.For example, if mfx & MM are recognized, the mfx
digital protocol is taken on by the decoder. Individual proto-
cols can be deactivated with Parameter CV 50.
• Interior lighting built in, digitally adjustable.
Interior lighting
Conductor's compartment lighting *
Baggage area lighting *
* Only when F0 is turned off
F0
F1
F2
5