Selecting An Insertion Tool (Not Included); Changing Insertion Tools - Parkside PAMFWP 20-Li A1 Originalbetriebsanleitung

Push the hose of an approved dust extraction
equipment(e.g. a workshop vacuum cleaner)
on to the adapter for external exhaust suction.
Selecting an insertion tool
(not included)
The universal system with easy tool change fits
common accessories.
Plunge saw blade
Materials:
Wood, plastic, plaster and other soft materials
Use:
– Cut-off and plunge cuts
– Sawing close to the edge, including in hard to
reach areas
Example: cutting notches in light construction walls.
Diamond saw blade
Materials:
Tile cement, tile joints
Use:
Removing material residue, e.g. tile cement when
replacing damaged tiles
– Reaming out joint compound between wall and
floor tiles.
12 GB
Scraper
Materials:
Mortar/cement residue, tile/carpet adhesive,
paint/silicone residue
Use:
– Removing material residue, e.g. carpet adhesive
residue on floors.
Grinding plate
Materials:
Wood and metal, wood*, Metal*
*depending on sanding sheet
Use:
– Sanding along edges and hard to reach areas.

Changing insertion tools

Note: To use the dust extraction system, you will
need to connect it before attaching the insertion
tool (see section "Connecting The Dust Extraction
System").
RISK OF INJURY!
Always remove the battery pack
working on the power tool.
If applicable, remove the current insertion tool.
To do so, flip up the lever
release.
before
6
for the tool
1