Removing / Charging / Attaching The Battery Pack; Removing And Charging The Battery Pack; Checking The Battery Level; Dust / Shavings Extraction - Parkside PAMFWP 20-Li A1 Originalbetriebsanleitung

Removing / Charging /
Attaching the battery pack
CAUTION! Always unplug from the mains
before removing or inserting the battery pack
from/in the charger.
Note: The battery pack comes partly charge.
Charge the battery pack in the charger before use,
ideally for a minimum of 1 hour.
This will ensure the battery pack delivers full power.
The Li-ion battery pack may be charged at any
time without reducing the life.
Interrupting the charging process does not damage
the battery pack.
Never charge the battery pack
temperatures below 10 °C or above 40 °C.
Removing and charging the
battery pack
1 To remove the battery pack
release button and pull out the battery
4
pack .
6
2. Insert the battery pack
charger .
12
3. Connect the mains plug to the socket. The LED
charging indicator
battery pack is connected to the charger and
the charger is connected to the mains, the
LED will light up green.
13
4. The green LED charging indicator
charging is completed and the battery pack
is ready for use.
6
5. Attach the battery pack
Green LED lights up
without battery pack
Green LED lights up
with battery pack
Red LED lights up with
battery pack
Red LED flashes with
battery pack
6
in ambient
6
, press the
6
in the rapid
6
will light up red. If no
14
means
13
to the product.
6
Rapid Charger ready
Battery pack fully
charged
Battery pack charging
Battery pack defect
Green LED flashes with
battery pack

Checking the battery level

Press the battery level button
battery charge.
The battery indicator
level.
3 RED LEDs light up = maximum charge
2 RED LEDs light up = medium charge
1 RED LED lights up = low charge

Dust / Shavings extraction

Never work on materials containing asbestos.
Asbestos is considered carcinogenic.
FIRE HAZARD!
Using power tools with a dust extraction system
which can be connected to a vacuum cleaner
poses a fire hazard! Unfavourable conditions,
e.g. sparking, grinding metal or metal pieces in
wood, wood dust inside the vacuum bag can
ignite. This can particularly occur if the wood
dust is mixed with paint particles or other
chemicals and the ground product is hot after
long work periods. Therefore avoid the
grinding material and the tool overheating.
Always empty the vacuum bag in the vacuum
cleaner before taking breaks.
Always use a dust extraction system.
Ensure the work area is well ventilated.
Observe your country's applicable rules for the
materials you are working on.
Connecting the dust extraction
system
Attach the dust extraction system to the tool.
Secure by attaching the housing attachment.
Slide the dust extraction element
tool. Fix by attaching the connecting ring
Battery pack too cold
or warm
to check the
3
will show the battery
5
onto the
8
.
10
GB 11