Herunterladen Inhalt Inhalt Diese Seite drucken
Bostitch F33PT Übersetzung Der Original-Anleitung
Vorschau ausblenden Andere Handbücher für F33PT:
F21PL, F33PT, F33PTSM,
© Stanley Bostitch
F28WW, N89RH17-2MCN,
GB Not to be reproduced without permission. Unauthorised copies of this document do
not constitute CE compliance for the products.
N89RH17-1 & N89RH17-2
FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce
document ne signifient en rien que les produits soient conformes aux normes CE.
DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien
dieses Dokuments erfüllen nicht die CE-Richtlinien für Produkte.
NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van
dit document willen niet zeggen dat de producten voldoen aan de CE-vereisten.
DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke
CE overholdelse for produkterne.
FI Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot eivät
muodosta tuotteille CE-yhdenmukaisuutta.
GR Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη εξουσιοδοτημένα
αντίγραφα του παρόντος εγγράφου δεν αποτελούν συμμόρφωση CE για τα προϊόντα.
IT Vietata la riproduzione senza permesso. Le copie non autorizzate di questo documento
non garantiscono la conformità CE per i relativi prodotti.
NO Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette dokumentet
oppfyller ikke kravene for CE-merking for produktet.
PT Reprodução proibida sem autorização prévia. As cópias não autorizadas deste
documento não estão em conformidade com a CE para os produtos.
ES Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento
no suponen la conformidad con las normas CE de los productos.
TOOL TECHNICAL DATA (ORIGINAL INSTRUCTIONS)
GB
SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento
DONNÉES TECNIQUES (TRADUCTION DE L'ORIGINAL)
FR
no suponen la conformidad con las normas CE de los productos.
TECHNISCHE GERÄTEDATEN (ÜBERSETZUNG DES ORIGINALS)
DE
TECHNISCHE SPECIFICATIE (VERTALING VAN ORIGINEEL)
NL
PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie
TEKNISKE DATA (OVERSÆTTELSE AF ORIGINAL)
DK
niniejszego dokumentu nie stanowią deklaracji zgodności CE prezentowanych
TEKNISET TIEDOT (KÄÄNNÖS ALKUPERÄISESTÄ)
FI
produktów.
Τεχνικ στοιχε α(ΜΕΤΑΦΡΑΣΗ ΑΠΟ ΤΟ ΠΡΩΤΟΤΥΠΟ)
GR
DATI TECNICI (TRADUZIONE DELL'ORIGINALE)
IT
CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie
TEKNISKE DATA (OVERSETTELSE FRA ORIGINAL)
NO
niniejszego dokumentu nie stanowią deklaracji zgodności CE prezentowanych
ESPECIFICAÇÕES TÉCNICAS (TRADUÇÃO DO ORIGINAL)
PT
produktów.
ESPECIFICACIONES TÉCNICAS (TRADUCCIÓN DEL ORIGINAL)
ES
TEKNISK DATA (ÖVERSÄTTNING AV ORIGINAL)
SE
SK Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto dokumentu nie
DANE TECHNICZNE NARZĘDZI (TŁUMACZENIE Z WERSJI ORYGINALNEJ)
PL
sú v súlade s CE pre dané výrobky.
TECHNICKÁ DATA NÁSTROJE (PŘEKLAD ORIGINÁLU)
CZ
SK
TECHNICKÉ PARAMETRE (PREKLAD ORIGINÁLU)
HU A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül
A SZERSZÁM MŰSZAKI ADATAI (EREDETI SZÖVEG FORDÍTÁSA)
HU
sokszorosított dokumentum nem jelenti a termék CE-megfelelőségét.
RO
FIŞA TEHNICĂ A SCULEI (TRADUCEREA VERSIUNII ORIGINALE)
RO Reproducerea neautorizată este interzisă. Copiile neautorizate ale acestui document
nu reprezintă conformitatea CE pentru produse.
www.bostitch.eu
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Bostitch F33PT

  • Seite 1 F21PL, F33PT, F33PTSM, © Stanley Bostitch F28WW, N89RH17-2MCN, GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE compliance for the products. N89RH17-1 & N89RH17-2 FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en rien que les produits soient conformes aux normes CE.
  • Seite 2 ?N89RH17-1 A 500 B 355 C 133 D 3.6 E 91 F 99.8 © Stanley Bostitch G 86.8 H 3.51 I 8.27 J 4.83 K 2.47 M BC602 N BC603 P RH17 Q(a) RH= 2.8-3.3 Q(b) RH= 50-90 MAGNALUBE GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE R RH=6.7-7...
  • Seite 3 © Stanley Bostitch GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE compliance for the products. FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en rien que les produits soient conformes aux normes CE.
  • Seite 4 © Stanley Bostitch GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE compliance for the products. FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en rien que les produits soient conformes aux normes CE.
  • Seite 5 SAFETY INSTRUCTIONS © Stanley Bostitch IMPORTANT READ CAREFULLY: It is important that all operators read and understand all sections of this Tool Technical Data manual and the separate Safety and Operating Instruction Manual which come with GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE this tool.
  • Seite 6 Always check that the Lower Contact Arm or Metal Connector Attachment moves freely before using tool. If any binding occurs, © Stanley Bostitch repeat assembly procedure or have tool serviced at an authorized Bostitch service center. GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE SEQUENTIAL TRIP - F21PL, F33PT, F28WW, N89RH17-2, N89RH17-2MCN compliance for the products.
  • Seite 7 εγγράφου δεν αποτελούν συμμόρφωση CE για τα προϊόντα. nails. (Fig 10) Note: Use only fasteners recommended by Bostitch for use in Bostitch tools or nails which meet Bostitch specifications. IT Vietata la riproduzione senza permesso. Le copie non autorizzate di questo documento non garantiscono la Warning! When installing metal connectors with the F21PL &...
  • Seite 8 DRIVER MAINTENANCE INSTRUCTIONS © Stanley Bostitch Worn driver causing poor quality or loss of power ● Wear on the driving tip will affect the nail drive, giving symptoms of bent and incompletely driven nails, and damaged nail heads GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE ●...
  • Seite 9: Consignes De Sécurité

    F21PL, F33PT & N89RH17-2MCN PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie Grâce à ses deux différents accessoires, le F21PL, F33PT & N89RH17-2MCN peut être utilisé soit comme cloueur de connecteurs stanowią deklaracji zgodności CE prezentowanych produktów.
  • Seite 10 DÉCLENCHEMENT SÉQUENTIEL - F21PL, F33PT, F28WW, N89RH17-2, N89RH17-2MCN NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document willen niet Le F21PL/F33PT/F28WW/N89RH17-2/N89RH17-2MCN est équipé en version standard du dispositif de déclenchement séquentiel zeggen dat de producten voldoen aan de CE-vereisten.
  • Seite 11 CE de los productos. Bostitch. Attention! Pour l’installation de connecteurs métalliques avec le F21PL / F33PT / N89RH17-2MCN n’utiliser qu’un bâton de clous SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la pour connecteurs métalliques à...
  • Seite 12 TIGE DEGUIDAGE- F21PL, F33PT, F33PTSM, N89RH17-1, N89RH17-2 & N89RH17-2MCN © Stanley Bostitch Fig. 12 GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE Repérer le guide (A) compliance for the products. Tirer sur le couvercle et tourner (B) Fig.
  • Seite 13: Sicherheitshinweise

    F21PL, F33PT & N89RH17-2MCN conformidad con las normas CE de los productos. Mittels der zwei Vorsätze kann der F21PL / F33PT / N89RH17-2MCN entweder als Metallverbinder-Nagelmaschine oder als ein standardmäßiger Rundkopfnagler benutzt werden. Alle Bedienpersonen müssen mit der Bedienung und Funktionsweise des PL Niniejszy dokument nie może być...
  • Seite 14: Sequenzauslösung

    DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments erfüllen nicht SEQUENTIELLMÜNDUNG - F21PL, F33PT, F28WW, N89RH17-2, N89RH17-2MCN die CE-Richtlinien für Produkte. Ihr neuer F21PL/F33PT/F28WW/N89RH17-2/N89RH17-2MCN ist standardmäßig mit einer Sequentiellmündung ausgestattet (grauer NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document willen niet Abzug).
  • Seite 15: Einstellung Der Eintreibtiefe (Fig 5)

    SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la Achtung! Bei der Verwendung von Metallverbindern mit dem F21PL / F33PT / N89RH17-2MCN: Nur jeweils einen Streifen conformidad con las normas CE de los productos.
  • Seite 16 Führungsstange - F21PL, F33PT, F33PTSM, N89RH17-1, N89RH17-2 & N89RH17-2MCN © Stanley Bostitch FIG 12 GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE Führung lokalisieren (A) compliance for the products. Abdeckung ziehen und drehen (B) FIG 13 Die Zugangsfenster für Ein- und Ausbau der Führungsstange (C) lokalisieren.
  • Seite 17: Veiligheidsinstructies

    CE prezentowanych produktów. F21PL, F33PT & N89RH17-2MCN Door middel van twee verschillende hulpstukken kan de F21PL / F33PT / N89RH17-2MCN worden gebruikt als een spijkermachine CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie voor het aansluiten van metalen delen of een standaard machine voor spijkers met ronde kop en het is belangrijk dat alle stanowią...
  • Seite 18 CE-vereisten. VOLGORDE-UITSCHAKELING - F21PL, F33PT, F28WW, N89RH17-2, N89RH17-2MCN DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke CE overholdelse for Uw nieuwe F21PL/F33PT/F28WW/N89RH17-2/N89RH17-2MCN is standaard uitgerust met een volgorde-uitschakeling (Grijze produkterne. trekker) 1.
  • Seite 19 Bostitch. stanowią deklaracji zgodności CE prezentowanych produktów. Waarschuwing! Bij het installeren van metalen aansluitingen met de F21PL / F33PT / N89RH17-2MCN: Per keer slechts één patroon met spijkers voor metalen aansluitingen gebruiken. CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie stanowią...
  • Seite 20 GELEIDESTANG- F21PL, F33PT, F33PTSM, N89RH17-1, N89RH17-2 & N89RH17-2MCN FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en rien que les produits soient conformes aux normes CE.
  • Seite 21 CE de los productos. Ved hjælp af to forskellige tilbehør kan F21PL / F33PT / N89RH17-2MCN enten bruges som sømmer til metalsamlestykker eller standardrundhovedsømmer, og det er vigtigt, at alle brugere forstår, hvordan værktøjet fungerer med hvert tilbehør.
  • Seite 22 Kontroller altid, at kontaktarmen eller tilbehøret til metalsamlestykker kan bevæge sig frit, før værktøjet tages i brug. Hvis GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE tilbehøret på nogen made binder, skal du gentage monteringsproceduren eller få værktøjet efterset af et autoriseret Bostitch- compliance for the products.
  • Seite 23 IT Vietata la riproduzione senza permesso. Le copie non autorizzate di questo documento non garantiscono la Bemærk: Brug kun de befæstelseselementer, der anbefales af Bostitch til brug i Bostitch- værktøj eller søm, der svarer til conformità CE per i relativi prodotti.
  • Seite 24 FIG 14. © Stanley Bostitch Installér styrespidsstang gennem (G) for 2.8mm til 3.3mm skaftsøm. Drej dæksel (B) for at lukke. Installér styrespidsstang gennem (H) for 3.3mm til 4.1mm skaftsøm. Drej dæksel (B) for at lukke. GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE compliance for the products.
  • Seite 25 F21PL, F33PT & N89RH17-2MCN conformidad con las normas CE de los productos. Kahden erillisen lisälaitteen ansiosta F21PL / F33PT / N89RH17-2MCN voi toimia joko ankkurointinaulaimena tai PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie tavallisena kupukantanaulaimena.
  • Seite 26 Varmista aina, että alempi kosketusvarsi tai metalliankkurien lisälaite liikkuu vapaasti, ennen kuin käytät työkalua. FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en Jos näin ei ole, toista vaihtotoimenpide tai anna työkalu valtuutetun Bostitch-huoltoliikkeen huollettavaksi. rien que les produits soient conformes aux normes CE.
  • Seite 27 PT Reprodução proibida sem autorização prévia. As cópias não autorizadas deste documento não estão em määritykset. conformidade com a CE para os produtos. Varoitus! Kun asennat metalliankkureita F21PL / F33PT / N89RH17-2MCN-työkalulla: • Käytä ainoastaan yhtä ankkurinaulalevyä ES Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la kerralla.
  • Seite 28 FIG 13 © Stanley Bostitch Hitta tillgångsfönster för installation och borttagande av guidestav (C ) Hitta guidestavs förvaringskanal (D) GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE Rotera höljet öppet för att installera eller ta bort guidestav (E) compliance for the products.
  • Seite 29 F21PL, F33PT & N89RH17-2MCN Με τη βο θεια δ ο διαφορετικ ν εξαρτημ των, το F21PL / F33PT / N89RH17-2MCN μπορε να χρησιμοποιηθε ως καρφωτικ ε τε για SK Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto dokumentu nie sú v súlade s CE pre dané...
  • Seite 30 χρησιμοποι σετε το εργαλε ο. Σε περ πτωση εμπλοκ ς, επαναλ βετε τη διαδικασ α συναρμολ γησης δ στε το εργαλε ο για zeggen dat de producten voldoen aan de CE-vereisten. σ ρβις σε εξουσιοδοτημ νο σ ρβις της Bostitch. ΣΕΙΡΙΑΚΗ ΑΣΦΑΛΕΙΑ...
  • Seite 31 CE prezentowanych produktów. Σημε ωση: Χρησιμοποιε τε μ νο τα καρφι που συνιστ η Bostitch για χρ ση στα εργαλε α Bostitch καρφι προδιαγραφ ν Bostitch. CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie Προειδοπο...
  • Seite 32 FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en ελατηρ ου. rien que les produits soient conformes aux normes CE. μβολο-οδηγ ς- F21PL, F33PT, F33PTSM, N89RH17-1, N89RH17-2 & N89RH17-2MCN DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments erfüllen nicht die CE-Richtlinien für Produkte. ΕΙΚ. 12 Εντοπ...
  • Seite 33 CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie Con l’uso di due accessori diversi, il modello F21PL / F33PT / N89RH17-2MCN può essere usato come chiodatrice per la stanowią deklaracji zgodności CE prezentowanych produktów.
  • Seite 34: Azionamento In Sequenza

    SICURA SEQUENZIALE - F21PL, F33PT, F28WW, N89RH17-2, N89RH17-2MCN DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke CE overholdelse for Il modello F21PL/F33PT/F28WW/N89RH17-2/N89RH17-2MCN è fornito di serie di una funzione di sicurezza sequenziale (grilletto grigio) produkterne.
  • Seite 35 CE prezentowanych produktów. Bostitch. Avvertenza! Quando si installano connettori metallici con l’unità F21PL / F33PT / N89RH17-2MCN usare solamente una striscia di CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie chiodi per connettori metallici alla volta.
  • Seite 36: Istruzioni Di Manutenzione

    FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en rien que les produits soient conformes aux normes CE. L’ASTA DELLA GUIDA- F21PL, F33PT, F33PTSM, N89RH17-1, N89RH17-2 & N89RH17-2MCN DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments erfüllen nicht FIG.
  • Seite 37 CE de los productos. Ved bruk av de to ulike anordningene kan F21PL / F33PT / N89RH17-2MCN brukes enten som en metallkoblingsspikerdriver eller som en standard rundhode spikerdriver, og det er viktig at samtlige brukere forstår hvordan verktøyet fungerer med de to ulike SE Prohibida la reproducción sin permiso.
  • Seite 38 Sjekk alltid at den nedre kontaktarmen eller metallkoblingsanordningen beveger seg fritt før du bruker verktøyet. Hvis de hefter GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE seg på noen måte, må du gjenta monteringen eller få utført service på verktøyet på et godkjent Bostitch servicesenter. compliance for the products.
  • Seite 39 IT Vietata la riproduzione senza permesso. Le copie non autorizzate di questo documento non garantiscono la conformità CE per i relativi prodotti. Merk: Bruk kun festeanordninger som er anbefalt av Bostitch til bruk i Bostitch- verktøy eller spiker som er i overensstemmelse med spesifikasjoner fra Bostitch.
  • Seite 40 FIG 14. © Stanley Bostitch Installer styrestang gjennom (G) for 2.8mm til 3.3mm trådspiker. Drei deksel (B) for å lukke. Installer styrestang gjennom (H) for 3.3mm til 4.1mm trådspiker. Drei deksel (B) for å lukke. GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE compliance for the products.
  • Seite 41: Instruções De Segurança

    CE prezentowanych produktów. Mediante a utilização de dois acessórios diferentes a ferramenta F21PL / F33PT / N89RH17-2MCN pode ser utilizada como agrafador de pregos para placas de metal ou como agrafador de pregos de cabeça redonda padrão, sendo importante que todos os operadores compreendam como a ferramenta funciona com qualquer dos dois acessórios.
  • Seite 42 NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document willen niet zeggen dat de producten voldoen aan de CE-vereisten. O seu novo agrafador F21PL/F33PT/F28WW/N89RH17-2/N89RH17-2MCN vem instalado de série com um disparo sequencial (gatilho cinzento). 1. Isto proporciona vantagens do ponto de vista de segurança, uma vez que não irá disparar um prego acidentalmente se a DK Må...
  • Seite 43 CE de los productos. satisfaçam as especificações da Bostitch. Aviso! Quando instalar placas de metal utilizando a ferramenta F21PL / F33PT / N89RH17-2MCN: Use somente um bloco de pregos PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie para placas de metal de cada vez.
  • Seite 44 VARETA DE GUIA- F21PL, F33PT, N89RH-17-1 E N89RH-17-2MCN & F33PTSM © Stanley Bostitch FIG. 12 GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE Localize a guia (A) compliance for the products. Puxe e rode a tampa (B) FIG 13.
  • Seite 45: Instrucciones De Seguridad

    CE de los productos. F21PL, F33PT & N89RH17-2MCN Por medio de dos accesorios diferentes la F21PL / F33PT / N89RH17-2MCN puede ser utilizada tanto como clavadora de PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie conectores metálicos o como clavadora estándar de clavos de cabeza redonda y resulta importante que todos los operadores...
  • Seite 46 SEGURO SECUENCIAL - F21PL, F33PT, F28WW, N89RH17-2, N89RH17-2MCN NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document willen niet Su nueva F21PL/F33PT/F28WW/N89RH17-2/N89RH17-2MCN viene provista de seguro secuencial como dotación estándar (gatillo zeggen dat de producten voldoen aan de CE-vereisten.
  • Seite 47 SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la conformidad con las normas CE de los productos. ¡Advertencia! Cuando se instalen conectores de metal con la F21PL / F33PT / N89RH17-2MCN: utilice sólo una plancha de clavos para conectores metálicos por vez.
  • Seite 48 VARILLA DE GUIA- F21PL, F33PT, F33PTSM, N89RH17-1, N89RH17-2 & N89RH17-2MCN © Stanley Bostitch FIG. 12 GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE Encuentre el manual (A) compliance for the products. Tire de la tapa y gírela (B) FIG 13.
  • Seite 49 SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la Genom användning av två olika tillsatser kan F21PL / F33PT / N89RH17-2MCN användas antingen som en plåtförbandspistol eller conformidad con las normas CE de los productos.
  • Seite 50: Fortlöpande Funktion Med Utlösningsmekanism

    Kontrollera alltid att nedre kontaktarmen eller plåtförbandstillsatsen kan röra sig fritt innan du använder verktyget. Om GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE verktyget kärvar, upprepa ovanstående förfarande eller lämna verktyget på service på en auktoriserad Bostitch-verkstad. compliance for the products.
  • Seite 51 Bostitchs specifikationer merking for produktet. Varning! Vid användning av plåtförband med F21PL / F33PT / N89RH17-2MCN, använd bara ett band plåtförbandspik åt gången. PT Reprodução proibida sem autorização prévia. As cópias não autorizadas deste documento não estão em UTTAGNING AV SPIK (FIG 11) conformidade com a CE para os produtos.
  • Seite 52 FIG 14 © Stanley Bostitch Installera guidestav genom (G) med 2.8mm till 3.3mm skaftspikar. Rotera höljet (B) tills det stängs. Installera guidestav genom (H) med 3.3mm till 4.1mm skaftspikar. Rotera hölje (B) tills det stängs. GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE compliance for the products.
  • Seite 53: Instrukcje Dotyczące Bezpieczeństwa

    CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie Dzięki zastosowaniu dwóch różnych przystawek, urządzenie F21PL / F33PT / N89RH17-2MCN można używać do wbijania metalowych łączników i standardowych gwoździ z okrągłymi łebkami. Wymaga to zapoznania się...
  • Seite 54 NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document willen niet zeggen dat de producten voldoen aan de CE-vereisten. SEKWENCYJNY MECHANIZM ZABEZPIECZAJĄCY - F21PL, F33PT, F28WW, N89RH17-2, N89RH17-2MCN Nowe urządzenie F21PL/F33PT/F28WW/N89RH17-2/N89RH17-2MCN jest standardowo wyposażone w sekwencyjny DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke CE overholdelse for mechanizm zabezpieczający (szary spust)
  • Seite 55 PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie stanowią deklaracji zgodności CE prezentowanych produktów. Uwaga: Należy stosować jedynie łączniki zalecane przez firmę Bostitch do firmowych narzędzi lub gwoździe zgodne ze specyfikacją firmy Bostitch. CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie Ostrzeżenie! Podczas wkładania metalowych łączników do urządzenia F21PL / F33PT / N89RH17-2MCN: wkładać...
  • Seite 56 Należy także zwrócić uwagę, by nie powstawały stałe zgięcia na sprężynach, gdyż compliance for the products. może to osłabić ich siłę. PRĘT PROWADNICZY- F21PL, F33PT, F33PTSM, N89RH17-1, N89RH17-2 & N89RH17-2MCN FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en RYS. 12 rien que les produits soient conformes aux normes CE.
  • Seite 57: Bezpečnostní Pokyny

    F21PL, F33PT & N89RH17-2MCN SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la Prostřednictvím dvou různých nástavců lze F21PL / F33PT / N89RH17-2MCN využít jako hřebíkovač ke spojování conformidad con las normas CE de los productos.
  • Seite 58 POSTUPNÉ SPOUŠTĚNÍ - F21PL, F33PT, F28WW, N89RH17-2, N89RH17-2MCN rien que les produits soient conformes aux normes CE. Nový F21PL/F33PT/F28WW/N89RH17-2/N89RH17-2MCN je dodáván s postupným spouštěním jako standard (šedá DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments erfüllen nicht spoušť)
  • Seite 59 Bostitch, které splňují specifikace Bostitch. conformidade com a CE para os produtos. Výstraha! Instalace kovových konektorů s F21PL / F33PT / N89RH17-2MCN: Najednou používejte pouze jednu tyčku kovových spojovacích hřebíků. ES Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la conformidad con las normas CE de los productos.
  • Seite 60 OBR. 13. © Stanley Bostitch Umístěte přístupový otvor k instalaci a demontáži vodicí tyče (C) Umístěte skladovací kanál vodicí tyče (D) GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE Otočením otevřete kryt k instalaci nebo demontáži vodicí tyče (E) compliance for the products.
  • Seite 61: Bezpečnostné Predpisy

    CE de los productos. F21PL, F33PT & N89RH17-2MCN Dvoma rozličnými nástavcami F21PL / F33PT / N89RH17-2MCN môže byť použitý ako nástroj na kovové spojovacie SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la svorkovanie alebo ako štandardné...
  • Seite 62 NÁSLEDNÉ SPÚŠŤANIE - F21PL, F33PT, F28WW, N89RH17-2, N89RH17-2MCN FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en Váš nový model F21PL/F33PT/F28WW/N89RH17-2/N89RH17-2MCN je štandardne vybavený Následným spúšťaním rien que les produits soient conformes aux normes CE.
  • Seite 63 Bostitch parametre. conformità CE per i relativi prodotti. Upozornenie! Pri inštalovaní kovových spojovacích svoriek s F21PL / F33PT / N89RH17-2MCN: Naraz používajte iba jednu sadu kovových spojovacích svoriek. NO Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette dokumentet oppfyller ikke kravene for CE- merking for produktet.
  • Seite 64 POKYNY NA ÚDRŽBU POHONU © Stanley Bostitch Opotrebovaný pohon spôsobuje nízku kvalitu alebo stratu energie ● Opotrebovanosť špičky pohonu ovplyvní vysúvanie klincov, ktoré budú vyzerať ohnuté a neúplne vysunuté, prípadne s poškodenými hlavičkami GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE ●...
  • Seite 65: Biztonsági Utasítások

    PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie stanowią deklaracji zgodności CE prezentowanych produktów. Az F21PL / F33PT / N89RH17-2MCN két különböző kiegészítő toldattal használható fémhez alkalmas szögbeverőként vagy szabványos körfejes szögbeverőként, és fontos, hogy mindenki, aki kezeli, értse, hogy bármelyik kiegészítő...
  • Seite 66 Mindig ellenőrizze, hogy az alsó érintkező kar vagy a fém toldat szabadon mozog-e, mielőtt használja a szerszámot. DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments erfüllen nicht Ha bármilyen elakadás történik, ismételje meg az eljárást, vagy vigye el javíttatni megfelelő Bostitch javító die CE-Richtlinien für Produkte.
  • Seite 67 CE de los productos. lenyomja a kioldó fület. Csúsztassa nyomórudat a szögekig. (9. Ábra) Megjegyzés: Csak a Bostitch által ajánlott kötőelemeket vagy a Bostitch specifikációnak megfelelő szögeket PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie használja a Bostitch N88RH és N88-2MCN szerszámokban.
  • Seite 68 FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en Vezető rúd – F21PL, F33PT, F33PTSM, N89RH17-1, N89RH17-2 & N89RH17-2MCN rien que les produits soient conformes aux normes CE.
  • Seite 69: Instrucţiuni De Siguranţă

    INSTRUCŢIUNI DE SIGURANŢĂ © Stanley Bostitch IMPORTANT, CITIŢI CU ATENŢIE: Este important ca toţi operatorii să citească şi să înţeleagă toate secţiunile din prezentul Manual de date tehnice al sculei şi din Manualul separat de GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE instrucţiuni cu privire la operare şi siguranţă, care sunt livrate împreună...
  • Seite 70 DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke CE overholdelse for produkterne. DECLANŞARE SECVENŢIALĂ - F21PL, F33PT, F28WW, N89RH17-2, N89RH17-2MCN Noua dvs. sculă F21PL/F33PT/F28WW/N89RH17-2/N89RH17-2MCN este livrată cu declanşare secvenţială montată FI Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot eivät muodosta tuotteille CE- ca standard (trăgaciul gri) yhdenmukaisuutta.
  • Seite 71 Glisaţi împingătorul în contact cu cuiele. (Fig 10) stanowią deklaracji zgodności CE prezentowanych produktów. Notă: Utilizaţi numai elemente de fixare recomandate de Bostitch pentru a fi utilizate la scule Bostitch sau cuie care îndeplinesc specificaţiile Bostitch. SK Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto dokumentu nie sú v súlade s CE pre dané...
  • Seite 72 CE. MONTAREA ŞI DEMONTAREA TIJEI DE GHIDARE - F21PL, F33PT, F33PTSM, N89RH17-1, N89RH17-2 şi N89RH17-2MCN DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments erfüllen nicht die CE-Richtlinien für Produkte.
  • Seite 73 © Stanley Bostitch GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE compliance for the products. FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en rien que les produits soient conformes aux normes CE.

Inhaltsverzeichnis