Add Device; Bluetooth Audio - Pioneer DEH-S410BT Bedienungsanleitung

Menu Item
DEL DEVICE
[DELETE YES],
[DELETE NO]

ADD DEVICE

DEV. INFO
* If two phones are connected, this function does not work on incoming calls that are received while
one of the phones is being used for a call.

Bluetooth audio

Important
• Depending on the Bluetooth audio player connected to this unit, the available operations will be
limited to the following two levels:
– A2DP (Advanced Audio Distribution Profile) can only play back songs on your audio player.
– AVRCP (Audio/Video Remote Control Profile) can perform functions such as playback, pause, select
song, etc.
• The sound of the Bluetooth audio player will be muted when the phone is in use.
• When the Bluetooth audio player is in use, you cannot connect to a Bluetooth telephone
automatically.
• Depending on the type of Bluetooth audio player you have connected to this unit, operation and
information displayed may vary based on availability and functionality.
1
Make a Bluetooth connection with the Bluetooth audio player.
2
Press SRC/OFF to select [BT AUDIO] as the source.
3
Press BAND/
NOTE
You must reconnect the Bluetooth connection when the source is switched or the unit is turned off.
TIP
When more than two and up to five devices are registered to the unit via Bluetooth, you can switch the
Bluetooth device by playing back songs on the device. By doing so, playing back a song from the
Bluetooth device of each passenger is easily available. However, depending on the usage conditions,
multiple connections may not be available and the audio files/songs may not be able to be played back
properly.
Basic operations
You can make various adjustments in the FUNCTION settings (page 22).
Purpose
Fast forward or reverse
Description
Delete the device information.
Register a new device.
Switch the device information on the display between the
device name and Bluetooth device address.
to start playback.
- 14 -
Operation
Press and hold or .