Herunterladen Inhalt Inhalt Diese Seite drucken

Velleman CAMCOLVC18 Bedienungsanleitung Seite 9

Vorschau ausblenden Andere Handbücher für CAMCOLVC18:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

7.5 Recording Video
Normal Recording
1.
Make sure there is a memory card installed in the camera.
2.
Switch the camera on. The display shows the remaining recording time.
3.
Press the record button to start recording.
The display backlight blinks. The display shows the recording time in
minutes and seconds. The camera saves a video file every 5 minutes.
4.
Press the record button again to stop recording.
The display backlight stops blinking. The display shows the remaining
recording time.
Note: When the memory card is full, the display shows "FULL". The camera
automatically stops recording.
Loop Recording
If you use the camera with a USB charger, you can record continuously. The
camera then saves a video file every 2 minutes. When the memory card is
full, it overwrites the oldest recordings.
Caution: Make sure that the charger matches the camera's specifications
(3 VDC, 2.0 W).
There are two possibilities:
Camera off, batteries installed: Plug the camera into a suitable USB
charger (3 VDC, 2.0 W). The camera switches on and starts loop
recording automatically. Press the record button to stop recording.
When you unplug the USB charger, the camera stops recording and
switches off after 2 seconds.
Camera off, no batteries installed: Plug the camera into a suitable USB
charger (3 VDC, 2.0 W). The camera switches on after 6 seconds and
starts loop recording automatically. Press the record button to stop
recording. When you unplug the USB charger, the camera switches off
immediately.
7.6 Playing Video
Playing on TV
1.
Switch the camera on.
2.
Unscrew the cap [1] from the back of the camera.
3.
Insert the black plug of the video cable (included) in the video output
[8] of the camera.
4.
Insert the other end (yellow, red, white plugs) of the cable in the
corresponding RCA connectors on your TV.
The camera display shows "AU".
5.
Make sure the TV is set to the correct channel.
6.
On the camera, press the menu button to select the video file you want
to play.
7.
Press the record button to start playback.
V. 02 – 02/10/2012
CAMCOLVC18
9
©Velleman nv

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis